Kenwood NX-5000 Series Common Function Reference page 82

3 BASIC OPERATIONS
3.7 Viewing the Receive History (Stack)
2
Select any of the "Caller ID", "Status Message", or "Short Message" categories and press the
or [ ] key.
The list for the selected category appears.
Note
If no data is stored, a Key Beep A (1 beep) sounds from the transceiver and "Empty" appears on the display.
The number of the stored stack data appears at the upper right of the display. Depending on the type of stack
data, the following icons appear at the left end of each stack data:
Caller ID
Status Message
Short Message
Unread Stack
3
Press the [ ] or [
Refer to "Selecting or Clearing Data from a
For Short Message, if the Menu ([Q]) or [*] key is pressed, a Key Beep A
(1 beep) sounds from the transceiver and the selected Short Message
appears.
Note
If the Short Message does not fit on one screen, press the [G] or [H] key to scroll lines up and down, and confirm
the entire message.
Common FUNC (K, F)/Ver 2.20
Table 3-7 Stack Mode
Message Type
] key to select the data and confirm.
List" for selection methods.
S t a c k
Caller ID
Status Message
Short Message
N e x t
C a l l e r I D
TRUCK 824
TRUCK 824
TRUCK 825
C a l l
Display
Unread
TRUCK 824
Please pick up
customers at
airport terminal
CONTENTS INDEX
Menu ([ ])
12 : 34
A
M
1
Back
12 : 34 A
M
0 0 1
De let e
Read
-
12 : 34 A
M
0 0 1
Back
51