Kenwood NX-5000 Series Common Function Reference page 314

16 MULTI RF DECK/ MULTI CONTROL HEAD
16.7 Audio Function
Procedure of the Intercom behavior
1
Pressing the Intercom
Intercom turns on and the transceiver enters Intercom Mode. At this time, voice communication is not initiated. When
in Intercom Mode, the "
2
Press the PTT switch when in Intercom Mode.
The transceiver enters the functioning Intercom status and initiates voice communication between Control Head 1
and Control Head 2. The audio of the Control Head of the PTT switch that is pressed first is prioritized and sounds
from the other Control Head. "Intercom" blinks only on the display of the receiving party while Intercom is functioning.
Common FUNC (K, F)/Ver 2.20
key on Control Head 1 or Control Head 2.
" icon lights on the display and "Intercom" appears.
Received Audio Output
External
Speaker
Audio Reception Audio Reception
RF Deck 1
(Selected RF (Unselected RF
Deck)
KRK-15B
KRK-14H
Basic Panel
Mic
Audio Input
Figure 16-42 Intercom
Received Audio Output
External External
Speaker Speaker
Audio Reception
RF Deck 2 RF Deck 3
(Unselected RF
Deck) Deck)
KRK-15B KRK-15B
KRK-14H
Basic Panel
Audio Input
Mic
CONTENTS
283
INDEX