Bluetooth-Compatible Device (Bluetooth Find Device) - Kenwood NX-5000 Series Common Function Reference

10 BLUETOOTH COMMUNICATION
10.3 Registering and Connecting a Bluetooth-compatible Device to the Transceiver (Pairing/ HSP Connection)
About Authentication
The authentication of pairing differs as follows depending on whether the Bluetooth-compatible device supports Secure
Simple Pairing:
0
If Secure Simple Pairing is not supported
If authenticating a Bluetooth-compatible device found in Bluetooth Find Device Mode, the same PIN Code needs to be
entered on both the transceiver and the Bluetooth-compatible device. A PIN Code is a number of 1 digit to 6 digits (from
0 to 999999).
If authenticating a Bluetooth-compatible device having an address configured in Define Bluetooth Device by pressing
the Bluetooth Connect / Disconnect key, the Fixed PIN preconfigured by using KPG-D1/ D1N is used.
0
If Secure Simple Pairing is supported
The behavior when authenticating differs as follows depending on whether an input function and display function are
available for the Bluetooth-compatible device:
Display
Input Functions
Functions
Disabled Disabled
Enabled Disabled
Enabled Enabled
Finding, Registering and Connecting a Bluetooth-compatible Device (Bluetooth
Find Device)
In Bluetooth Find Device Mode, the transceiver searches for a Bluetooth-compatible device, and the transceiver can start
pairing for the found Bluetooth-compatible device.
Operating the transceiver
1
Search for a Bluetooth-compatible device in Bluetooth Find Device Mode.
Refer to "Finding a Bluetooth-compatible Device (Bluetooth Find
2
Press the [ ] or [
key.
Common FUNC (K, F)/Ver 2.20
Table 10-4 Behavior when Secure Simple Pairing is Supported
Authenticating a Bluetooth-compatible device is not required.
Pairing cannot occur because the transceiver cannot authenticate this Bluetooth-
compatible device. In this case, pairing ends.
Whether the Passkey displayed on the transceiver and the Passkey displayed on the
Bluetooth-compatible device are the same needs to be confirmed. A Passkey is a 6-
digit number.
] key to select the Bluetooth-compatible device, and then press the
Find Device
C on n
Operation
Device)" for operation methods.
12 : 34 A
M
1
LMIC
C11-100047-HP
Ba c k
Menu ([
CONTENTS INDEX
]) or [ ]
183