Kenwood NX-5000 Series Common Function Reference page 157

6 SOUND
6.6 Restricting Alert Tone When Consecutively Receiving a Call (Alert Tone Restriction from 2nd Call)
0
Behavior examples of when the transceiver receives a Group Call
If the transceiver receives a Group Call, various functions such as Alert Tone are not activated when the transceiver
receives a Group Call again using the same Group ID while the amount of time configured in Auto Reset Timer elapses.
In this case, even if the Individual ID of the transmitting transceiver is either the same or different, various functions such
as Alert Tone will not be activated when the Group ID for the Group Call received second time or later is the same as the
Group ID for the Group Call received first time.
Individual ID 1
Receiving
Group ID 1
Various
functions such
as Alert Tone
Auto Reset Timer
Auto Reset Timer
A: The transceiver receives a Group Call using the same Group ID from the transceiver (Individual ID 1) having the same
Individual ID before the time configured in Auto Reset Timer elapses, so that various functions such as Alert Tone will not
be activated.
B: Even if the transmitting transceiver has the different Individual ID, the transceiver receives a Group Call using the same
Group ID before the time configured in Auto Reset Timer elapses, so that various functions such as Alert Tone will not be
activated.
C: Even if the transmitting transceiver has the same Individual ID, the transceiver receives a Group Call using the different
Group ID before the time configured in Auto Reset Timer elapses, so that various functions such as Alert Tone will be
activated.
D: The transceiver receives a Group Call using the different Group ID from the transceiver having the different Individual ID
before the time configured in Auto Reset Timer elapses, so that various functions such as Alert Tone will be activated.
E: Even if the transceiver receives a Group Call using the same Group ID, the time configured in Auto Reset Timer has
already elapsed, so that various functions such as Alert Tone will be activated.
Note
If Alert Tone Restriction from 2nd Call is enabled, various functions such as Alert Tone will not be activated upon the
reception of the second and subsequent calls from the same transceiver even if "Off" is configured in Auto Reset
Timer.
Configuration using KPG-D1/ D1N
0
Configuring Alert Tone Restriction from 2nd Call to be enabled or disabled (
NXDN Information > General)
0
Configuring Alert Tone Restriction from 2nd Call to be enabled or disabled (
DMR Information > General)
Common FUNC (K, F)/Ver 2.20
Individual ID 1 Individual ID 2
Group ID 1 Group ID 1
A B
Auto Reset Auto Reset
Timer stops. Timer stops.
Auto Reset Timer
Figure 6-3 Alert Tone Restriction from 2nd Call (Group Call)
Individual ID 2 Individual ID 3
Group ID 2 Group ID 3
C D
Auto Reset Auto Reset
Timer stops. Timer stops.
Auto Reset Timer Auto Reset Timer
CONTENTS
Individual ID 3
Group ID 3
E
Auto Reset
Timer expires.
Auto Reset Timer
Transceiver Settings > NXDN >
Transceiver Settings > DMR >
INDEX
126