Remaining Memory Capacity (Low Memory Warning) - Kenwood NX-5000 Series Common Function Reference

9 STORING RECORDED AUDIO/ GPS DATA
9.1 About microSD Card
Note
The method of storing an audio data file when the full capacity of a microSD card or the full capacity of the internal memory
has been used varies depending on the configuration in First-in First-out Deletion. (Refer to
Method of an Audio Data File (First-in First-out
0
GPS data file
The GPS data acquired by using GPS Data Storage is stored in the GPS data file having the same date in the GPS
folder. (Refer to Storing the GPS Data (GPS Data
If no GPS data file exists or if the date of the file changes, a new GPS data file is created automatically.
If the clock count by RTC is paused, or if the clock of the transceiver is not configured, the GPS data is stored in the GPS
data file of the file size less than 43 MB. If no GPS data file exists or if the file size reaches 43 MB, a new GPS data file
is created automatically.
In order to create a GPS data file, the following conditions needs to be satisfied:
The number of GPS data files that exist in the GPS folder is less than 250.
0
A capacity for storing 86,400 GPS data is available. (If the capacity is not available, the oldest GPS data file is deleted
0
to secure the required capacity.)
If the clock count by RTC is paused, or if the clock of the transceiver is not configured, no file having "009999" at the
0
beginning of the file name exists.
Configuring the Warning Behavior for the Remaining Memory Capacity (Low
Memory Warning)
Low Memory Warning is the function to warn that the available capacity is insufficient by the display or Alert Tone when
the available capacity on a microSD card becomes 10 % or less.
The transceiver behaves as follows according to the configuration in Low Memory Warning:
Configuration
The transceiver does not warn even if the available capacity on a microSD card becomes 10 %
Off
or less.
If the available capacity on a microSD card becomes 10 % or less, "Low SD Memory" appears on
Display
the display for 1 sec. After that, "Low SD Memory" appears for 1 sec at 10-sec intervals.
If the available capacity on a microSD card becomes 10 % or less, "Low SD Memory" appears on
the display for 1 sec, and a Low SD Memory Tone (4 beeps) sounds from the transceiver
simultaneously.
Display & Alert Tone
After that, "Low SD Memory" appears for 1 sec at 10-sec intervals, and a Low SD Memory Tone
(4 beeps) sounds from the transceiver simultaneously. However, a Low SD Memory Tone (4
beeps) does not sound from the transceiver if the transceiver is transmitting.
Configuration using KPG-D1/ D1N
Configuring Low Memory Warning (
Memory)
Common FUNC (K, F)/Ver 2.20
Deletion).)
Storage).)
Table 9-2 Low Memory Warning
Description
Transceiver Settings > Optional Features > Optional Features 2 > microSD/
Configuring the Storage
CONTENTS INDEX
158