Kenwood NX-5000 Series Common Function Reference page 117

4 TRANSMISSION/ RECEPTION
4.5 Displaying the Signal Strength Level (RSSI Level, BER) (Maintenance Display)
2
Switch the frequency display, ID/ channel number display or channel.
Switching to the frequency display:
Pressing the [F] key switches the display to the frequency display.
Pressing the [E] key while the ID/ channel number display is displayed
switches the display to the frequency display. The receive frequency of
the control channel currently acquired or the receive frequency of the
selected channel appears in the first line, and the transmit frequency
appears in the second line.
Switching to the RSSI/ BER display:
Pressing the [E] key switches the display to the RSSI/ BER display.
Pressing the [F] key while the ID/ channel number display is displayed
switches the display to the RSSI/ BER display. The BER appears on the
second line.
Switching to the ID/ channel number display:
Pressing the [F] key while the frequency display is displayed switches
the display to the ID/ channel number display. Pressing the [E] key while
the RSSI/ BER display is displayed switches the display to the ID/
channel number display.
In the first line, the channel ID and channel number of the receive
channel specified by the system when the control channel is acquired
appear. If no control channel is acquired, "**-****" appears.
In the second line, the channel ID and channel number of the transmit
channel specified by the system when the control channel is acquired
appear. If no control channel is acquired, "**-****" appears.
Switching channels:
Pressing the [G] or [H] key switches the channel number.
If Adjacent Channel information is retained in the transceiver, Adjacent
Channels and Normal Hunt Channels can be selected starting from the
first Adjacent Channel.
If Adjacent Channel information is not retained in the transceiver,
Normal Hunt Channels can be selected starting from the channel
number of the currently selected Normal Hunt Channel.
Registration is started by selecting a Normal Hunt Channel or Adjacent
Channel which can acquire a control channel, and then pressing the
Menu ([Q]) or [*].
Common FUNC (K, F)/Ver 2.20
M a i n t e n a n c e
RX 453.212500MHz
TX 458.212500MHz
S el ec t
M a i n t e n a n c e
R S S I L e v e l - 9 6 d B m
BER
M a i n t e n a n c e
RX
TX
S el ec t
When an Adjacent Channel is selected
M a i n t e n a n c e
R S S I L e v e l - 1 0 1 d B m
S i t e
S el ec t
When a Normal Hunt Channel is selected
M a i n t e n a n c e
R S S I L e v e l - 8 8 d B m
S i t e
S el ec t
CONTENTS INDEX
12 : 34 A
M
5
Bac k
12 : 34 A
M
1
0.0
Back
12 : 34
A
M
5
1- 15
1- 815
Bac k
12 : 34 A
M
A d j
-
Bac k
12 : 34 A
M
3
-
Bac k
86