Kenwood NX-5000 Series Common Function Reference page 317

16 MULTI RF DECK/ MULTI CONTROL HEAD
16.7 Audio Function
Muting the Speaker of a Control Head (Speaker 1-2 Mute)
Speaker 1-2 Mute is the function to forcibly mute the output of the speaker of the other Control Head by key operations on
the connected Control Head 1 and Control Head 2. The function is for Dual Control Head. This function limits Control Heads
that can emit the received audio of the Selected RF Deck and enhances the private communications of the other Control
Head.
Speaker 1 indicates the speaker of Control Head 1. Speaker 2 indicates the speaker of Control Head 2.
Speaker 1-2 Mute can be toggled between on and off by any of the following key operations:
1. Pressing the Speaker 1-2 Mute key toggles Speaker 1-2 Mute between on and off.
2. Entering Menu Mode by pressing the Menu key, and then executing "Speaker 1-2 Mute" can toggle Speaker 1-2
Mute between on and off.
Note
If Transmit Audio Monitor is enabled, audio is not emitted from the monitoring Control Head when Speaker 1-2 Mute
0
is toggled on.
Even if a Control Head is muted, transmitting by the other Control Head or receiving by an RF Deck can be confirmed
0
with the lighting of the Transmit/ Busy LED.
When Speaker 1-2 Mute is on, by operating a key other than the PTT switch or Hook on the Control Head with the function
0
toggled on, or by operating any key (including Volume Control) on the other Control Head, Speaker 1-2 Mute is toggled
off.
Common FUNC (K, F)/Ver 2.20
Received Audio Output Received Audio Output
External
Speaker
Audio Reception Audio Reception
RF Deck 1
(Selected RF
Deck)
KRK-15B
is pressed.
KRK-14H
Basic Panel
Audio Reception
Mic
Figure 16-45 Speaker 1-2 Mute
Received Audio Output
External External
Speaker Speaker
Audio Reception
RF Deck 2 RF Deck 3
(Unselected RF (Unselected RF
Deck) Deck)
KRK-15B KRK-15B
KRK-14H
Basic Panel
Mic
Mute
CONTENTS INDEX
286