Kenwood NX-5000 Series Common Function Reference page 51

2
2 GETTING STARTED
GETTING STARTED
When the transceiver is turned ON after the power source is attached to the transceiver, the transceiver starts up. To make
the transceiver ready for use, the configuration data needs to be created using KPG-D1/ D1N and written to the transceiver.
Figure 2-1 KPG-D1/ D1N Main Window
By using KPG-D1/ D1N, the zone and channel data needs to be configured and then the parameters for various functions
can be configured. Refer to the help texts for configuration methods.
Common FUNC (K, F)/Ver 2.20 20
CONTENTS INDEX