Kenwood NX-5000 Series Common Function Reference page 428

19 CONFIGURATION FOR EACH FUNCTION
19.1 Available Functions for the PF Keys
Function Name
Enters Format SD Card Mode, and the formatting of a microSD card is
enabled.
Format SD Card
See
Formatting a microSD Card
Waits for the activation of the Key Function assigned to the 2nd Function and
starts counting down the Mode Reset Timer. The Function status will be reset
Function
if no key is pressed before the amount of time configured in Mode Reset
Timer elapses.
GPS Toggles the built-in GPS receiver between On and Off.
Enters GPS Position Display Mode.
GPS Position
See
Display
GPS POSITION DISPLAY
If an NXDN Trunking system is selected, the Group ID in the NXDN Trunking
system can be specified directly by using the keypad.
See
Changing the Group ID by Specifying the ID (Group ID Entry) (NXDN Trunking
Group ID/Channel
System Only)
Entry
If a system other than an NXDN Trunking system is selected, the channel
number can be specified directly by using the keypad.
See
Changing the Channel by Specifying the Number (Channel Entry)
Analog Conventional:
The transceiver enters Selcall Mode of FleetSync or of MDC-1200. In Selcall
Mode, a call can be initiated by selecting an ID configured in the ID List of
FleetSync or of MDC-1200, or by directly entering an ID.
P25 Conventional:
Enters Talkgroup ID Select Mode. In Talkgroup ID Select Mode, the Talkgroup
ID configured for a channel can be changed.
Group
See
P25 FUNC
NXDN Conventional/ DMR Conventional:
Enters Group Call Mode. In Group Call Mode, a Group Call can be initiated by
selecting a Group ID registered in the Group ID List.
See
NXDN FUNC
Common FUNC (K, F)/Ver 2.20
Description
Making a Group Call
Making a Group Call
Available
Communication
Systems
ALL
ALL
ALL
ALL
ALL
Analog Conventional
P25 Conventional
NXDN Conventional
DMR Conventional
CONTENTS INDEX
*1
397