Kenwood NX-5000 Series Common Function Reference page 333

16 MULTI RF DECK/ MULTI CONTROL HEAD
16.15 Communications in an Emergency (Emergency)
16.15 Communications in an Emergency (Emergency)
Emergency is the function to notify the base station or people around of the emergency situation by sending radio signals
or emitting an alarm when a user is placed in the emergency state.
In a Multi RF Deck system, one of the multiple RF Decks executes the Emergency behavior in Emergency Mode, and the
other RF Decks do not transmit and receive. The RF Decks enter Emergency Mode as a single system structured with Multi
RF Deck/ Multi Control Head.
A Zone-channel on which the Emergency behavior is activated can be configured by using the configuration in Emergency
Channel Type (Selected, Fixed).
0
Selected
The transceiver resets the current channel moving status (such as Home Channel) and starts the Emergency behavior
on the Zone-channel last selected by the Selected RF Deck.
0
Fixed
If the transceiver enters Emergency Mode, the transceiver migrates to the Zone-channel of the RF Deck configured in
Emergency Zone-Channel and starts the Emergency behavior.
The Emergency key can be configured for each Control Head. Also, Emergency in AUX Input can be configured only for
one RF Deck or Control Head of all RF Decks and Control Heads.
RF Deck 1
(Selected RF
Deck)
Control Head
1
Common FUNC (K, F)/Ver 2.20
ON
EMG
RF Deck 2
(Unselected
RF Deck)
Control Head
2
Figure 16-65 Emergency
Emergency Mode
RF Deck 1 RF Deck 2
(Selected RF (Unselected
Deck) RF Deck)
Control Head Control Head
1
CONTENTS INDEX
2
302