External Speaker (Unselected Speaker Offset) - Kenwood NX-5000 Series Common Function Reference

16 MULTI RF DECK/ MULTI CONTROL HEAD
16.7 Audio Function
Adjusting the Output Level of the External Speaker (Unselected Speaker Offset)
Unselected Speaker Offset is the function to lower the output level of the external speaker connected to the Unselected
RF Deck. This function is used to improve the audio of the Selected RF Deck.
Entering Menu Mode by pressing the Menu key, and then executing "Unselected Speaker Offset" can switch the offset value
(0 dB, -3 dB, -9 dB) of the audio output level of the external speaker connected to the Unselected RF Deck.
0
0 dB is the same output level as the output level of the Selected RF Deck.
0
-3 dB is output level 3 dB lower than the output level of the Selected RF Deck.
0
-9 dB is output level 9 dB lower than the output level of the Selected RF Deck.
The received audio of the
Selected RF Deck
Ext.
SP
RF Deck 1
(Selected RF
Deck)
Control Head
1
The received audio of the
Selected RF Deck
0 dB: Audio emitted from the Ext.SP of the
Unselected RF Deck at the same level as the output
level of the Selected RF Deck
Note
If a PC command for changing the volume is received from a D-sub 25-pin connector, the volume of the RF Deck to which
0
the D-sub 25-pin connector is connected is changed regardless of whether the RF Deck is the Selected RF Deck or not,
but the offset configuration continues to be applied.
If a device is connected to the Unselected RF Deck by using a Bluetooth connection, the volume offset of the device with
0
the Bluetooth connection is not applied.
Configuration using KPG-D1/ D1N
Configuring Unselected Speaker Offset (
Common FUNC (K, F)/Ver 2.20
The received audio of the
Unselected RF Deck
Ext.
SP
-9 dB
RF Deck 2
(Unselected
RF Deck)
Control Head
2
The received audio of the
Selected RF Deck
Figure 16-41 Unselected RF Deck Speaker Offset
Transceiver Settings > Optional Features > Optional Features 1 > Others)
The received audio of the The received audio of the
Unselected RF Deck
Selected RF Deck
⇒ Level lowered by 9 dB
Ext.
SP
RF Deck 1 RF Deck 2
(Selected RF (Unselected
Deck) RF Deck)
Control Head Control Head
1
The received audio of the The received audio of the
Selected RF Deck
-9 dB: Audio emitted from the Ext.SP of the
Unselected RF Deck at the level lowered by 9 dB from the
output level of the Selected RF Deck
CONTENTS
Ext.
SP
2
Selected RF Deck
281
INDEX