Entering Or Deleting A Code - Kenwood NX-5000 Series Common Function Reference

3 BASIC OPERATIONS
3.8 Operating the Transceiver in Each Mode (Common Operation)

Entering or Deleting a Code

This section explains operations using operating examples for Individual Call Mode. The displays used in this section are
the displays when Individual Call Acknowledge Request in an NXDN Conventional system is enabled.
0
Entering a code using the [G] or [H] key
The following is the operation example to enter "ID 12" in Individual Call Mode:
Note
The following are the main keys to be used for these operation examples:
0
To select a code: the [G] or [H] key
To determine: the Menu ([Q]) or [*] key
0 Pressing and holding the [G] or [H] key continuously scrolls the code up or down.
The code that can be entered varies depending on the mode and the number of entered digits.
0
Common FUNC (K, F)/Ver 2.20
12 : 34 A
M
Individual
ID
B ack
[ ] or [ ] key
12 : 34 A
M
Individual
ID 1
Sele ct De le te
Menu ([ ]) or [*] key (Select)
Select "1".
12 : 34 A
M
Individual
ID 1
Call De le te
[ ] or [ ] key
12 : 34
A
M
Individual
ID 10
Sele ct De le te
Select "2". Menu ([ ]) or [*] key (Select)
12 : 34 A
M
Individual
ID 12
Call De le te
[ ] key
2 3 4 5 6
[ ] key
[ ] key
1 2 9 0 1
[ ] key
CONTENTS
61
INDEX