Kenwood NX-5000 Series Common Function Reference page 61

3 BASIC OPERATIONS
3.3 Using Function Keys
Mode Reset Timer
Mode Reset Timer is the timer for canceling the standby status of further key entry in Function Mode, and for canceling the
function activation status of 2nd Function. By using this function, Function Mode does not need to be disabled manually.
The function also helps by canceling the Function Mode automatically so as not to remain in Function Mode for too long a
time.
The transceiver has some special Function Modes. When the transceiver enters one of these modes, a preprogrammed
display appears on the main display and sub-display and the Mode Reset Timer starts counting down the time. If no key
is pressed before the amount of time configured in Mode Reset Timer expires, the transceiver returns to the previous mode.
If a Function key is pressed, the transceiver waits for a function configured for 2nd Function to be activated, and then Mode
Reset Timer starts counting down. If no key is pressed before the amount of time configured in Mode Reset Timer expires,
the transceiver cancels waiting for the function to be activated. Mode Reset Timer can be extended by key operation.
Mode Reset Timer is used for the following Function Modes:
2-tone Mode
*1
Activity Detection Mode
*1
ANR Preset Mode
*1
Audio Profile Mode
*1
Auto Dimmer Mode
Autodial Mode
Autodial Programming Mode
*1
AUX Mode
*1
AUX A/B/C Mode
Battery Information Display Mode
*1
Bluetooth Mode
*1
Bluetooth Device Mode
Bluetooth Find Device Mode
Bluetooth Headset Connection Type Mode
Bluetooth Information Mode
Bluetooth My Devices Mode
*1
Bluetooth Speaker Mode
*1
Broadcast Mode
Channel Entry Mode
*1
Clock Mode
Clock Adjustment Mode
*1
Color Scheme Mode
Direct Channel & OST Mode
*1
Display Format Mode
Eject SD Card Mode
*1
External Mic Sense Mode
External Speaker Mode
*1
Fixed Volume Mode
Format SD Card Mode
Forward Mode
Common FUNC (K, F)/Ver 2.20
Table 3-3 Objective Function Modes for Mode Reset Timer
*1
*1
*1
*1
CONTENTS INDEX
30