Kenwood NX-5000 Series Common Function Reference page 343

16 MULTI RF DECK/ MULTI CONTROL HEAD
16.16 Bluetooth Communication
Switching the Speaker to Emit Audio (Bluetooth Speaker)
In a Multi RF Deck/ Multi Control Head structure, whether to emit audio from the speaker of the Bluetooth-compatible device
connected by Headset Profile, or from the internal or the external speaker can be toggled by the configuration in Bluetooth
Speaker (Off, Only, Both (Bluetooth+Radio)). The speaker to emit audio varies according to the configurations in Bluetooth
Speaker and Bluetooth Interface Selection (RF Deck, Control Head).
0
RF Deck
By pressing the Bluetooth Speaker key, or by pressing the Menu key to enter Menu Mode and then executing "Bluetooth
Speaker", the configuration in Bluetooth Speaker can be changed.
In the following diagram, a Bluetooth speaker is connected to all RF Decks. If "Both" is configured in Bluetooth
Speaker, the pattern of emitting audio when the audio is simultaneously received is as follows:
Common FUNC (K, F)/Ver 2.20
Audio Reception ①
RF Deck 1
(Selected)
Audio Reception ②
RF Deck 2
(Unselected)
Audio Reception ③
RF Deck 3
(Unselected)
Figure 16-75 Pattern of Emitting Audio (RF Deck)
CONTENTS INDEX
312