Kenwood NX-5000 Series Common Function Reference page 162

6 SOUND
6.7 Configuring Audio Profile (Audio Profile)
Note
If using an external microphone unlisted in the table above, configuring "None" in Microphone Type or Microphone
0
Type for Control Head 2 is recommended.
Pressing the Menu key places the transceiver in Menu Mode, and then the transceiver enters Microphone Type Mode
0
by selecting "Microphone Type". In Microphone Type Mode, the configuration in Microphone Type can be changed.
If the structure for Mobile is Dual Control Head, the configuration of Microphone Type can be changed when Microphone
0
Type Mode is entered by operating Control Head 1, and the configuration of Microphone Type for Control Head 2 can
be changed when Microphone Type Mode is entered by operating Control Head 2.
Microphone Sense/ External Microphone Sense
Microphone Sense and External Microphone Sense are the input sensitivity of the microphone.
Within the range between -20 dB and +20 dB, the microphone sensitivity of the internal microphone can be configured in
Microphone Sense, and the microphone sensitivity of the external microphone can be configured in External Microphone
Sense.
The appropriate level of microphone sensitivity for normal operation is 0 dB. Based on this level, the parameter of the
microphone sensitivity can be configured.
On a digital channel, configuring Digital Audio Offset enables the transceiver to function after the offset value configured
in Digital Audio Offset is added to or deleted from the configuration values in Microphone Sense and External Microphone
Sense.
Note
If a level lower than "0 dB" is configured in Microphone Sense or External Microphone Sense, Modulation Limiting
0
(minimum) in Analog FM is lowered because the amplitude limit level is also simultaneously lowered.
Pressing the Menu key places the transceiver in Menu Mode, and then the transceiver enters Mic Sense Mode by
0
selecting "Mic Sense". In Mic Sense Mode, the configuration in Microphone Type can be changed.
Pressing the Menu key places the transceiver in Menu Mode, and then the transceiver enters External Mic Sense Mode
0
by selecting "External Mic Sense". In External Mic Sense Mode, the configuration in External Microphone Sense can
be changed.
For Mobile, the Mic sensitivity of when "Mic Line" is configured for the Modulation Line can be configured in Microphone
0
Sense, and the Mic sensitivity of when "MI2 Line" or the Mic Line of a Bluetooth-compatible device is configured for the
Modulation Line can be configured in External Microphone Sense.
Configuration using KPG-D1/ D1N
0
Configuring Microphone Sense (
0
Configuring External Microphone Sense (
Digital Audio Offset
Digital Audio Offset is the function to enable the transceiver to function after the offset value configured in Digital Audio
Offset is added to or deleted from the configuration values in Microphone Sense and External Microphone Sense. This
function is used when the microphone level used on digital channels and the microphone level used on analog channels
are to be configured separately.
The configuration range of Digital Audio Offset is between 6 dB and -10 dB. On a digital channel, the transceiver functions
with the combined value of the configuration value in Microphone Sense or External Microphone Sense and the
configuration value in Digital Audio Offset.
Configuration using KPG-D1/ D1N
Configuring Digital Audio Offset (
Common FUNC (K, F)/Ver 2.20
Transceiver Settings > Audio Profile > General > Microphone Sense)
Transceiver Settings > Audio Profile > General > Microphone Sense)
Transceiver Settings > Audio Profile > General > Microphone Sense)
CONTENTS INDEX
131