Kenwood NX-5000 Series Common Function Reference page 176

7 BATTERY
7.1 Displaying the Remaining Battery Power Level (Battery Indicator)
Icons
(Flashing)
Configuration using KPG-D1/ D1N
Configuring Battery Indicator (
Warning that the Battery Voltage Is Low (Battery Warning)
7.2
Supported Models: Portable
Battery Warning can be used to notify a user by emitting a beep or flashing the LED when the remaining battery power is
low.
The transceiver always monitors whether the battery voltage goes low and notifies a user that the remaining battery power
is low according to the configuration in Battery Indicator when the battery voltage level goes lower than the warning voltage
level. (Refer to Displaying the Remaining Battery Power Level (Battery
Configuration
The transceiver detects that the battery voltage is low while transmitting. When the battery voltage
While Transmitting level goes lower than the warning voltage level (6.2 V), the transceiver notifies a user that the
remaining battery power is low by a flashing red Transmit LED.
The transceiver always detects whether the battery voltage goes low while the transceiver is in
use. When the battery voltage goes below the warning voltage level (during transmission: 6.2 V,
Always non-transmission: 7.0 V), the transceiver notifies a user that the remaining battery power is low
according to the Battery Indicator configuration by changing the "Battery Status" icon, and by
flashing a red Transmit LED.
The transceiver always detects whether the battery voltage goes low while the transceiver is in
use. When the battery voltage goes below the warning voltage level (during transmission: 6.2 V,
Always - Late Warning non-transmission: 6.5 V), the transceiver notifies a user that the remaining battery power is low
according to the Battery Indicator configuration by changing the "Battery Status" icon, and by
flashing a red Transmit LED.
Also, if Battery Warning Tone is enabled, the transceiver notifies a user that the remaining battery power is low by making
the Battery Warning Tone (3 beeps) sound from the transceiver if the PTT switch is not pressed when the battery voltage
level goes lower than the warning voltage level.
Note
This function cannot be activated if "Off" has been configured in Battery Indicator.
Configuration using KPG-D1/ D1N
0
Configuring Battery Warning (
0
Configuring Battery Warning Tone to be enabled or disabled (
Optional Features 1 > Battery)
Common FUNC (K, F)/Ver 2.20
Table 7-2 Battery Status Icon (Portable only)
Full
Sufficient
Low
Very Low
Transceiver Settings > Optional Features > Optional Features 1 > Battery)
Table 7-3 Battery Warning
Transceiver Settings > Optional Features > Optional Features 1 > Battery)
Status
Indicator).)
Description
Transceiver Settings > Optional Features >
CONTENTS
145
INDEX