Kenwood NX-5000 Series Common Function Reference page 37

1 FUNCTIONS AND PANEL LAYOUT
1.2 NX-5700/ NX-5800/ NX-5900
KCH-21R (Handheld Control Head)
KCH-21R is the Handheld Control Head that can be used by connecting to Mobile. By using KCH-21R, the transceiver can
be operated in hand as Portable.
[A] Key
A
The preassigned function will be activated or will be
changed to the active state.
[B] Key
B
The preassigned function will be activated or will be
changed to the active state.
Transmit LED/ Busy LED
C
These LEDs light when the transceiver transmits or
receives a signal.
Power Switch
D
The transceiver is turned ON when this switch is pressed
and the transceiver is turned OFF when this switch is
pressed again.
AUX Key
E
The preassigned function will be activated or will be
changed to the active state.
Built-in Microphone
F
Speaker
G
The received audio and the Alert Tone sound from the
speaker.
LCD
H
The channel number and the transceiver's status appear
on this display.
Common FUNC (K, F)/Ver 2.20
6
7
8
10
12
13
15
Figure 1-4 KCH-21R (Handheld Control Head) Front View
1
4 3 2
5
9
11
14
I
[G]/ [H] Key
The preassigned function will be activated or will be
changed to the active state. It is normally used to change
the zone or channel.
J
[Q] (Menu) Key
The preassigned function will be activated or will be
changed to the active state. In this manual, the [Q]
(Menu) key is described as the Menu ([Q]) key.
K
[O] (Back) Key
The preassigned function will be activated or will be
changed to the active state. In this manual, the [O]
(Back) key is described as the Back ([O]) key.
L
[E]/ [F] Key
The preassigned function will be activated or will be
changed to the active state. It is normally used to change
the zone or channel.
CONTENTS
6
INDEX