Kenwood NX-5000 Series Common Function Reference page 155

6 SOUND
6.5 Using the Transceiver as a Megaphone (Public Address)
Even if Public Address is enabled and the PTT switch is pressed while Dropout Delay Time or Dwell Time of Scan is
0
counting down, the timer is not extended.
If Public Address is enabled and the PTT switch is pressed while the Auto Reset Timer of each call is counting down,
0
the Auto Reset Timer extends while the PTT switch is pressed and held.
Configuration using KPG-D1/ D1N
Assigning functions to the PF keys on the transceiver (
About the Speaker to Emit Audio
While Public Address is enabled, the speaker to emit audio when the PTT switch is pressed and the speaker to emit audio
when an audio signal is received with the PTT switch released are as follows:
Table 6-13 Speaker to Emit Audio When Public Address Is Used
Connection Status of Connection Status of
KES-5
Connected via KAP-2
(4-5 Pin Short)
Connected via KAP-2
(5-6 Pin Short)
Disconnected
Depends on the configuration in External Speaker.
*1
Common FUNC (K, F)/Ver 2.20
KES-3
When the PTT Switch Is Pressed
Connected
Disconnected
Connected
Disconnected
Connected
KCH-19 (Basic Panel)/ KCH-20R
(Featured Panel):
Disconnected
KCH-21R (Handheld Control
Head):
No speaker to emit audio
Transceiver Settings > Key Assignment)
Speaker to Emit Audio
KES-5
KES-5
KES-5
KES-5
KES-3
Internal Speaker
CONTENTS
When an Audio Signal Is
Received with the PTT Switch
Released
KES-3 or the internal speaker
Internal Speaker
KES-5
KES-5
KES-3 or the internal speaker
Internal Speaker
INDEX
*1
*1
124