Connecting An External Power Source; Using A Regulated Power Supply; Using A Cigarette Lighter Socket - Kenwood TH-235A Instruction Manual

CONNECTING AN EXTERNAL POWER SOURCE
You can connect the transceiver to a regulated power
supply via an optional PG-2W cable, or to the cigarette
lighter socket in your vehicle via an optional PG-3J cable.
Note: /f input voltage exceeds approximately 18 V, an alarm sounds and
"dCErr' appears on the display.
m Using a Regulated Power Supply
Note:
supply. Connect the black lead of this cable to the
negative (—) terminal.
m@ Using a Cigarette Lighter Socket
Connect the transceiver to the cigarette lighter socket in
your vehicle using the optional PG-3J Cigarette Lighter
cable.
DC IN jack Cigarette lighter socket
PG-3J cable
DC-DC converter
Cigarette lighter socket
rer
——— a)
PG-2W