Kenwood NX-5000 Series Common Function Reference page 433

19 CONFIGURATION FOR EACH FUNCTION
19.1 Available Functions for the PF Keys
Function Name
Analog Conventional:
The transceiver disables the QT tone or DQT code and the Optional Signaling
and unmutes the speaker upon detection of a carrier.
P25 Conventional:
The transceiver disables the NAC and unmutes the speaker upon detection
of a frame.
Monitor
NXDN Conventional:
The transceiver resets the matching state of RAN code and Optional Signaling
and unmutes the speaker upon detection of an NXDN frame.
See
P25 FUNC
0
NXDN FUNC
0
Multi RF Deck View is toggled between On and Off.
Note
Multi RF Deck
This function can be used only when KCH-20R (Featured Panel) or
View (Mobile only)
KCH-21R (Handheld Control Head) is connected to either Control Head 1
or Control Head 2.
Analog Conventional:
The transceiver disables the QT tone or DQT code and the Optional Signaling
and unmutes the speaker upon detection of a carrier while the Monitor
Momentary key is pressed and held.
P25 Conventional:
The transceiver disables NAC and unmutes the speaker upon detection of a
frame while the Monitor Momentary key is pressed and held.
Monitor
Momentary NXDN Conventional:
The transceiver resets the matching state of RAN code and Optional Signaling
and unmutes the speaker upon detection of an NXDN frame while the Monitor
Momentary key is pressed and held.
See
P25 FUNC
0
NXDN FUNC
0
Toggles the OST between enabled and disabled.
Operator See
Selectable Tone
Analog FUNC
(OST)
Enters OST List Mode. In OST List Mode, an OST List can be selected.
Note
OST List can be configured only in Hold for the Operator Selectable
OST List
Tone key, and the configuration cannot be changed.
See
Analog FUNC
(OST)
OST Down Decreases the OST list number in steps of 1.
OST Down Pressing and holding the OST Down key decreases the OST list number in
(Continuous) steps of 1 every 100 ms.
OST Up Increases the OST list number in steps of 1.
OST Up Pressing and holding the OST Up key increases the OST list number in steps
(Continuous) of 1 every 100 ms.
Common FUNC (K, F)/Ver 2.20
Description
Temporarily Disabling the Signaling (Monitor)
Temporarily Disabling the Signaling (Monitor)
Temporarily Disabling the Signaling (Monitor)
Temporarily Disabling the Signaling (Monitor)
Changing the Decode/ Encode Combination of the QT/ DQT
Changing the Decode/ Encode Combination of the QT/ DQT
Available
Communication
Systems
Analog Conventional
P25 Conventional
NXDN Conventional
ALL
Analog Conventional
P25 Conventional
NXDN Conventional
Analog Conventional
Analog Conventional
Analog Conventional
Analog Conventional
Analog Conventional
Analog Conventional
CONTENTS INDEX
*1
402