Kenwood NX-5000 Series Common Function Reference page 205

9 STORING RECORDED AUDIO/ GPS DATA
9.6 Confirming microSD Card Contents via a PC (SD Card Direct Access)
0
If KCH-19 is not attached to the RF Deck:
1
Connect the transceiver to the PC by using the KPG-46X programming cable.
The screen to confirm whether to enter SD Card Direct
Access Mode appears.
2
Press the [ ] or [
A Key Beep A (1 beep) sounds from the transceiver, and a
caution message appears.
3
Press the Menu ([
A Key Beep A (1 beep) sounds from the transceiver, and then
the transceiver enters SD Card Direct Access Mode.
If a microSD card is inserted in the SD card slot, the "
appears.
0
If multiple SD card slots exist (Mobile only):
1
Connect the transceiver to the PC by using the KPG-46X programming cable.
The screen to confirm whether to enter SD Card Direct
Access Mode appears.
Common FUNC (K, F)/Ver 2.20
] key to select "Start", and then press the
]) or [ ] key.
SD Access
Cannel
Start
OK
Menu ([ ]) or
SD Access
OK
" icon
SD Access
Cannel
Start
OK
CONTENTS
12 : 34
[ ] key.
12 : 34
Extended Access
Time Required.
12 : 34
SD Access
12 : 34
174
INDEX
A
M
1
A
M
A
M
A
M
1