Kenwood NX-5000 Series Common Function Reference page 437

19 CONFIGURATION FOR EACH FUNCTION
19.1 Available Functions for the PF Keys
Function Name
Temporarily attenuates the volume level of the speaker.
Speaker
See
Attenuation
Temporarily Reducing the Volume Level of the Speaker (Speaker Attenuation)
Pressing the Speaker 1-2 Mute key of Control Head 1 mutes the speaker of
Control Head 2.
Pressing the Speaker 1-2 Mute key of Control Head 2 mutes the speaker of
Speaker 1-2 Mute
Control Head 1.
(Mobile only)
Note
This function can be used only in a Dual Control Head structure of Mobile.
Enters Squelch Level Mode. In Squelch Level Mode, the Squelch level can be
changed.
Squelch Level
See
Analog FUNC
Analog Conventional:
The transceiver opens squelch and unmutes the speaker.
P25 Conventional:
The transceiver disables the NAC and unmutes the speaker upon detection
of a frame.
Squelch Off NXDN Conventional:
The transceiver resets the matching state of RAN code and Optional Signaling
and unmutes the speaker upon detection of an NXDN frame.
See
P25 FUNC
0
NXDN FUNC
0
Analog Conventional:
The transceiver opens squelch and unmutes while the Squelch Off Momentary
key is pressed and held.
P25 Conventional:
The transceiver disables NAC and unmutes the speaker upon detection of a
carrier while the Squelch Off Momentary key is pressed and held.
Squelch Off
NXDN Conventional:
Momentary
The transceiver disables the RAN code and Optional Signaling and unmutes
the speaker upon detection of a carrier while the Squelch Off Momentary key
is pressed and held.
See
P25 FUNC
0
NXDN FUNC
0
Enters Stack Mode. In Stack Mode, the data stored in the stack memory of the
transceiver, such as call records, Status Messages and Short Messages, can
be referred or cleared.
Stack
See
Viewing the Receive History (Stack)
The transceiver enters Status Mode. In Status Mode, a status configured in
the Status List of FleetSync, P25 Trunking, NXDN, or DMR can be selected.
Also, in a FleetSync or NXDN system, a Status Message can be sent by
directly entering a status number.
Status
See
P25 FUNC
0
NXDN FUNC
0
Common FUNC (K, F)/Ver 2.20
Description
Adjusting the Squelch Level (Squelch Level)
Temporarily Disabling the Squelch (Squelch Off)
Temporarily Disabling the Squelch (Squelch Off)
Temporarily Disabling the Squelch (Squelch Off)
Temporarily Disabling the Squelch (Squelch Off)
Notifying the System of the Transceiver Status (Status)
Sending and Receiving a Status Message (Status Call)
Available
Communication
Systems
ALL
ALL
Analog Conventional
Analog Conventional
P25 Conventional
NXDN Conventional
Analog Conventional
P25 Conventional
NXDN Conventional
ALL
Analog Conventional
P25 Trunking
NXDN Conventional
DMR Conventional
NXDN Trunking
CONTENTS INDEX
*1
406