Kenwood NX-5000 Series Common Function Reference page 367

17 STRUCTURING A MULTI RF DECK/ MULTI CONTROL HEAD
17.1 Initial Configuration for Multi RF Deck/ Multi Control Head
2
Remove the flat cable from the display unit connector (CN6) of KCH-19M.
3
Remove the cable from the display unit connector (CN2) of KCH-19M.
KCH-19M
4
Plug the cable into the connector (CN2) of KRK-15BM.
5
Plug the flat cable into the connector (CN1) of KRK-15BM.
CN1
CN2
Note
Be careful when plugging the flat cable into CN1.
Common FUNC (K, F)/Ver 2.20
CN2
CN6
Figure 17-2 Removal of the Cables
Figure 17-3 Connection of the Cables
KRK-15BM
CONTENTS INDEX
336