Kenwood NX-5000 Series Common Function Reference page 423

18 VOX
18.4 Disabling the VOX by Using the PTT Switch (Cancel Operation)
18.4 Disabling the VOX by Using the PTT Switch (Cancel Operation)
Cancel Operation is the function to disable VOX by pressing the PTT switch when VOX is enabled.
If Cancel Operation is enabled, VOX is disabled by operating the PTT switch, the External PTT (Voice) port, or the PTT
switch of a Bluetooth-compatible device when VOX is enabled.
Even if VOX is disabled by Cancel Operation, VOX is enabled by pressing and holding the VOX key or by executing "VOX"
after entering Menu Mode by pressing the Menu key.
If the VOX key is not configured and "VOX" is not configured in Menu Mode, VOX can be enabled by turning the transceiver
OFF and ON again.
Configuration using KPG-D1/ D1N
Configuring Cancel Operation to be enabled or disabled (
Features 2 > Conventional > VOX)
Notifying a User of the Start of the VOX Transmission with a
18.5
Tone (VOX Proceed Tone)
VOX Proceed Tone is the tone that sounds from the transceiver to notify that the audio transmission becomes available
after the transmission is started by using VOX.
If VOX Proceed Tone is enabled, a VOX Proceed Tone that notifies that the audio transmission becomes available sounds
from the transceiver after the transmission is started by using VOX.
Note
A VOX Proceed Tone does not sound from the transceiver if other tones, such as a Sidetone or a PTT ID Sidetone, are
configured to sound.
Configuration using KPG-D1/ D1N
Configuring VOX Proceed Tone to be enabled or disabled (
Features 2 > Conventional > VOX)
Selecting a Control Head for Using VOX (Control Head for
18.6
VOX)
Supported Models: Mobile
Control Head for VOX is the function to select either Control Head 1 or Control Head 2 for enabling VOX in a Dual Control
Head structure.
KCH-20R (Featured Panel) needs to be connected to a Control Head for using VOX.
Configuration
Control Head 1 The VOX function behaves in Control Head 1 with KCH-20R (Featured Panel) connected.
Control Head 2 The VOX function behaves in Control Head 2 with KCH-20R (Featured Panel) connected.
Configuration using KPG-D1/ D1N
Configuring Control Head for VOX (
> VOX)
Common FUNC (K, F)/Ver 2.20
Transceiver Settings > Optional Features > Optional
Transceiver Settings > Optional Features > Optional
Table 18-2 Control Head for VOX
Description
Transceiver Settings > Optional Features > Optional Features 2 > Conventional
CONTENTS INDEX
392