Kenwood NX-5000 Series Common Function Reference page 128

5 INDICATION AND DISPLAY
5.9 The Icons on the LCD
Icons
Priority-channel/ Priority Monitor ID Icon
0
Appears when the Priority Channel or Priority Monitor ID is selected.
: Priority 1 Channel/ Priority Monitor ID 1
: Priority 2 Channel/ Priority Monitor ID 2
: Priority Monitor ID 3
: Priority Monitor ID 4
Channel Add Icon
0
Appears when the channel to be scanned is selected.
Zone Add Icon
0
Appears when the zone to be scanned is selected.
Scrambler Icon
0
Appears when the Scrambler is enabled.
Encryption Icon
0
Appears when the Encryption of the bit scrambling format is enabled. There are 2 states as follows:
Lighted: No carrier message is received
Blinking: When an encrypted carrier message is received
Also, this icon lights when the transceiver is in the Key Fail state, even for Encryption in the AES/ DES
format.
Encryption (AES) Icon
0
Appears when the Encryption (AES) is enabled. There are 2 states as follows:
Lighted: When no carrier message is received or sent
Blinking: When an encrypted carrier message is received
Encryption (DES) Icon
0
Appears when the Encryption (DES) is enabled. There are 2 states as follows:
Lighted: When no carrier message is received or sent
Blinking: When an encrypted carrier message is received
Encryption (ARC4) Icon
0
Appears when the Encryption (ARC4) is enabled. There are 2 states as follows:
Lighted: When no carrier message is received or sent
Blinking: When an encrypted carrier message is received
Talk Around Icon
0
Appears when the Talk Around is enabled.
Monitor Open/ Squelch Off Icon
0
Appears when the transceiver is unmuted, or when signaling is disabled.
External Speaker Icon
0
Appears when the external speaker is enabled.
External Speaker (Internal + External) Icon (Mobile only)
0
Appears when the internal speaker and external speaker are enabled.
Noise Reduction Icon
0
Appears when the Noise Reduction is enabled. There are 2 states as follows:
Lighted: Noise Reduction is enabled
Blinking: Noise Reduction is being executed
Call Icon
0
Indicates the status of the signaling. There are 2 states as follows:
Lighted: The state where the PTT switch is pressed and the Optional Signaling is disabled.
Blinking: The state where Optional Signaling matches (including when communications by NXDN or P25
Voice Call is determined)
Common FUNC (K, F)/Ver 2.20
Description
CONTENTS
97
INDEX