Kenwood NX-5000 Series Common Function Reference page 297

16 MULTI RF DECK/ MULTI CONTROL HEAD
16.5 Basic Operations
Note
RF Deck 1 always becomes the Selected RF Deck after the FPU data is written.
Multi RF Deck View
For KCH-20R or KCH-21R, if Multi RF Deck View is enabled, the channel names of all RF Decks in a Multi RF Deck system
can be displayed simultaneously on the display.
Also, if Multi RF Deck View is disabled, only the channel of the Selected RF Deck is displayed.
The configuration in Multi RF Deck View can be changed by any of the following key operations:
1. Pressing the Multi RF Deck View key can toggle Multi RF Deck View between On and Off.
2. Entering Menu Mode by pressing the Menu key, and then executing "Multi RF Deck View" can toggle Multi RF Deck
View between On and Off.
The following is the display for Triple RF Deck:
Selected RF Deck Number Icon
Unselected RF Deck Number Icon
The following is the display for Dual RF Deck:
Selected RF Deck Number Icon
Unselected RF Deck Number Icon
Common FUNC (K, F)/Ver 2.20
Channel Name
Featured Panel (KCH-20R)
TX LED Icon
Figure 16-27 Multi Deck View (Triple RF Deck)
Channel Name
Featured Panel (KCH-20R)
Figure 16-28 Multi Deck View (Dual RF Deck)
Supplementary Field 2
Sub-LCD
Busy LED Icon
2
Supplementary Field 2
Sub-LCD
TX LED Icon Busy LED Icon
CONTENTS
266
INDEX