Switching The Display Language - Kenwood NX-5000 Series Common Function Reference

3 BASIC OPERATIONS

3.11 Switching the Display Language

3.11 Switching the Display Language
The language of the characters that appear on the transceiver display and of the voice guide can be configured as a language
other than English, such as Spanish or French. Also, the language can be changed by the operation of the transceiver, such
as from English to Spanish or from French to English.
The language to be used for the string of text of Display Customization and for the audio of Voice Announcement (Voice
Announcement Type = Standard) can be configured in Voice and Display Language of KPG-D1/ D1N.
Configuration
Configures the main language to be used. After the configuration data is written to the transceiver, the
language configured in Language 1 is applied for the characters that appear on the transceiver display
and for the voice guide, as long as the language is not changed by operating the transceiver.
Language 1
The languages that can be configured are as follows:
Traditional Chinese (China)
Italian, Dutch, Russian, Portuguese (Brazil)
Configures the language that is changed by the transceiver operation. From the following languages, a
language other than the language of Language 1 can be configured:
Language 2 English, Spanish (Spain), Spanish (Latin America), French, German, Italian, Dutch, Russian,
Portuguese (Brazil)
If the language is not changed by the transceiver operation, "None" is configured.
Configures the language that is changed by the transceiver operation. From the following languages, a
language other than the languages of Language 1 and Language 2 can be configured:
English, Spanish (Spain), Spanish (Latin America), French, German, Italian, Dutch, Russian,
Language 3
Portuguese (Brazil)
If the language is not changed by the transceiver operation, or if switching is only with 2 languages,
"None" is configured.
*1 Supported by Firmware A only. However, K-type Firmware A supports only ASCII characters. A-type supports Traditional
Chinese as before.
In Menu Mode, the language of the characters that appear on the display and of the voice guide can be changed.
Pressing the Menu key causes the transceiver to enter Menu Mode, and then selecting "Language" can change the language
to a language that is configured in Language 1 to Language 3. (Refer to
Note
The language configuration changed by key operation is stored in the transceiver.
0
If "User Programmable" is configured in Voice Announcement Type, by changing the language by key operation, the
0
changed language is applied to only the display. In this case, the language used for the voice guide is not changed.
Configuration using KPG-D1/ D1N
Configuring Voice and Display Language (
Common FUNC (K, F)/Ver 2.20
Table 3-12 Voice and Display Language
Description
*1
, English, Spanish (Spain), Spanish (Latin America), French, German,
Transceiver Settings > Optional Features > Optional Features 1)
Using Menu Mode.)
CONTENTS
76
INDEX