Kenwood NX-5000 Series Common Function Reference page 472

INDEX
Busy LED
Caller ID Stack
Changing Configuration Data of 1 RF Deck
While a System in a Multi RF Deck/ Multi Control
Head Structure Is Operating
Changing Configuration Data While a System in
a Multi RF Deck/ Multi Control Head Structure Is
Operating
Changing the Brightness of the Backlight (LCD
Brightness)
Changing the Channel
Changing the Channel by Specifying the
Number (Channel Entry)
Changing the Channel with a Single Touch
Changing the Color Scheme of the Transceiver
Display (Color Scheme)
Changing the Configuration of the Transceiver
(Front Panel Programming Mode)
Changing the Display Positions of a Channel
Name and an Icon When Multi RF Deck View Is
On
Changing the Group ID by Specifying the ID
(Group ID Entry) (NXDN Trunking System Only)
Changing the Tone Volume Level with a Single
Touch (Selectable Tone Level)
Changing the Zone
Changing the Zone-channel
Channel Spacing
Character Entry
Checking the Bluetooth Device Name (Bluetooth
Information)
Checking the Detailed Information of a Battery
(Battery Information Display)
Checking the Firmware Version (Transceiver
Information Mode)
Clear Caller ID Stack on Reply
Clock Display
COM Port Functions
Communicating Directly Between Control Heads
(Intercom)
Communication Ports
Communications in an Emergency (Emergency)
Conditions to Activate the Horn Alert
CONFIGURATION FOR EACH FUNCTION
Configuration in KPG-D1/ D1N If Changed from
a Multi RF Deck System to a Single RF Deck
Structure
Common FUNC (K, F)/Ver 2.20
C
372
366
243
375
122
181, 308
149
245
103
423
282
296
302
230
393
385
88 Configuration in KPG-D1/ D1N If Changed from
a Single RF Deck Structure to a Multi RF Deck
System
Configuration in KPG-D1/ D1N If Control Heads
Are Switched
Configuration in KPG-D1/ D1N if RF Decks Are
56
Switched
Configuring Audio Profile (Audio Profile)
Configuring Mobile Relay Station
Configuring Recording Time (Maximum
Recording Length)
Configuring the Alert Tone (Alert Tone Pattern)
93
Configuring the Bluetooth Device Name of the
Transceiver (Bluetooth Device Name)
41
Configuring the Connection Destination of a
42
Bluetooth-compatible Device (Bluetooth
Interface Selection)
45
Configuring the DIP Switch
94
Configuring the Display Order of Data in Stack
Mode (Stack Order)
Configuring the FPU Data and Writing the FPU
Data to Each RF Deck
Configuring the GPS Position Display
Configuring the Initial Configuration
Configuring the Input Sensitivity of the
44
Microphone (VOX Gain Level)
Configuring the Maximum Volume Level
(Maximum Volume)
Configuring the Minimum Volume Level
40
(Minimum Volume)
40
Configuring the Offset Value for Volume Level
80
(Tone Volume Offset)
69
Configuring the Output Method of the Received
Audio and Beep (Multi RF Deck Audio Output
Type)
Configuring the Storage Method of an Audio
Data File (First-in First-out Deletion)
Configuring the Volume Level of Various Tones
(Tone Volume)
Configuring the Warning Behavior for the
57
Remaining Memory Capacity (Low Memory
Warning)
Configuring Voice Guidance Method (Voice
Announcement Type)
Confirming microSD Card Contents via a PC (SD
Card Direct Access)
Connecting by Headset Profile
Connecting by Serial Port Profile
Connecting the External Microphone
Connecting the External Speaker
Connecting the RF Deck by Using a D-sub 25-
pin Cable
Connecting the Transceiver to a PC
CONTENTS INDEX
378
384
381
127
325
163
117
180
207
258
54
252
150
249
390
120
120
121
288
159
121
158
138
173
197
202
388
332, 388
327
21
441