Kenwood NX-5000 Series Common Function Reference page 306

16 MULTI RF DECK/ MULTI CONTROL HEAD
16.6 Modulation Line
Case 3: Unselected RF Deck with Bluetooth
If a Bluetooth headset is connected to an Unselected RF Deck, pressing the PTT switch of the Bluetooth headset enables
the Mic Line of the Bluetooth headset regardless of the Modulation Line configuration.
The Modulation Line configuration of the Mic PTT of KPG-D1/ D1N and the Mic Lines enabled when the PTT (microphone)
switch of Control Head 1 or Control Head 2 is pressed are as follows:
Table 16-6 Mic Line (Mic PTT) (Unselected RF Deck with Bluetooth)
Modulation Line Setting
Mic Line MI2 Line
Disconnect Disconnect
Connect Disconnect
Disconnect Connect
Connect Connect
Common FUNC (K, F)/Ver 2.20
Figure 16-37 Case 3: Unselected RF Deck with Bluetooth
Operation
Control Head 1 - [PTT]
Control Head 2 - [PTT]
Control Head 1 - [PTT]
Control Head 2 - [PTT]
Control Head 1 - [PTT]
Control Head 2 - [PTT]
Control Head 1 - [PTT]
Control Head 2 - [PTT]
Mic Input
None
None
Control Head 1 - Mic Line
Control Head 2 - Mic Line
Selected RF Deck - MI2 Line
Selected RF Deck - MI2 Line
Control Head 1 - Mic Line
Selected RF Deck - MI2 Line
Control Head 2 - Mic Line
Selected RF Deck - MI2 Line
CONTENTS INDEX
275