Kenwood NX-5000 Series Common Function Reference page 225

10 BLUETOOTH COMMUNICATION
10.4 Displaying a Bluetooth-compatible Device (Bluetooth My Devices)
Note
A Bluetooth-compatible device registered in the transceiver is displayed in the format of either the Bluetooth device name,
0
Bluetooth device address, or device class. Pressing the [E] or [F] key can switch the display. (Refer to
Contents of a Bluetooth-compatible
If the Bluetooth device name of a Bluetooth-compatible device registered in the transceiver cannot be acquired, the
0
Bluetooth device name is displayed as "- - -".
If the transceiver receives an individual call while in Bluetooth My Devices Mode, Bluetooth My Devices Mode ends.
0
0
Connecting to a Bluetooth-compatible device, or resetting the connection
1
In Bluetooth My Devices Mode, press
2
Press the Menu ([
If a disconnected Bluetooth-compatible device is selected:
A Key Beep A (1 beep) sounds from the transceiver, and then the screen
to confirm whether to connect appears.
If a connected Bluetooth-compatible device is selected:
A Key Beep A (1 beep) sounds from the transceiver, and then the screen
to confirm whether to reset the connection appears.
3
Press the Menu ([
If a disconnected Bluetooth-compatible device is selected:
The connection process by HSP Connection starts. The LED flashes
blue and "Connecting" appears on the display.
Common FUNC (K, F)/Ver 2.20
Device.)
[ ] or
]) or [ ] key.
]) or [ ] key.
[ ] key to select a Bluetooth-compatible device.
CONTENTS
About the Displayed
12 : 34 A
M
My Devices 1
LMIC
C11-100047-HP
Conn Del et e
12 : 34
A
M
My Devices 1
Connect?
O K Ba c k
12 : 34 A
M
My Devices 1
Disconnect?
O K Ba c k
12 : 34
A
M
My Devices 1
Connecting
194
INDEX