Kenwood NX-5000 Series Common Function Reference page 221

10 BLUETOOTH COMMUNICATION
10.3 Registering and Connecting a Bluetooth-compatible Device to the Transceiver (Pairing/ HSP Connection)
3
Complete pairing.
When pairing completes, the Bluetooth-compatible device is registered in the transceiver, and the connection
process starts by HSP Connection or SPP Connection. However, if a connected Bluetooth-compatible device exists,
the connection process by HSP Connection or SPP Connection does not start.
A Ring Tone sounds from the Bluetooth-compatible device during the connection process. In this case, start-up
operations need to be done on the Bluetooth-compatible device. Refer to the instruction manual supplied with the
Bluetooth-compatible device for details on the start-up operations.
*If a Bluetooth-compatible device is registered in the transceiver, "Connecting" does not appear.
For the Headset Profile connection, the microphone and speaker of the Bluetooth-compatible device can be used
when the connection process completes. For the Serial Port Profile connection, the communication to KPG-D1/ D1N
and using the PC Interface Protocol become available. In this case, a Bluetooth Connect Tone (2 beeps) sounds
from the transceiver, the "
0
If a pairing request from a Bluetooth-compatible device supporting Secure Simple Pairing and
having an input function and display function is received
1
Receive a pairing request from a Bluetooth-compatible device.
If the Bluetooth-compatible device is already registered in the transceiver, the connection process starts by HSP
Connection or SPP Connection without pairing occurring. Proceed to step 3.
If the Bluetooth-compatible device is not registered in the transceiver, the Passkey confirmation screen appears and
the LED flashes blue.
If permitting pairing, whether the Passkey displayed on the transceiver and the Passkey displayed on the Bluetooth-
compatible device are the same needs to be confirmed. Proceed to step 2.
If rejecting pairing, press the Home ([T]) key to end pairing. Also, pairing ends if 30 sec elapse with the Passkey
displayed.
Common FUNC (K, F)/Ver 2.20
Z o n e 1
C h a n n e l 1
C o n n e c t i n g
Me nu Z on e+
" icon blinks, and "Connected" appears for 1 sec. Also, the LED turns Off.
Z o n e 1
C h a n n e l 1
C o n n e c t e d
Me nu Z on e+
LMIC
Passkey
123456
O K
12 : 34 A
M
12 : 34 A
M
12 : 34 A
M
CONTENTS
190
INDEX