Kenwood NX-5000 Series Common Function Reference page 261

12 FUNCTIONS LINKED TO A VEHICLE
12.2 Controlling Vehicle Operation According to the State of the Horn Alert Port (Horn Alert)
Conditions to Activate the Horn Alert
The conditions to activate the Horn Alert vary on a Conventional Channel (Analog/ NXDN/ P25/ DMR), in an LTR Trunking
system, in a P25 Trunking system, or in an NXDN Trunking system.
Conventional Channel (Analog/ NXDN/ P25/ DMR)
On a Conventional Channel (Analog/ NXDN/ P25/ DMR), one of the following conditions needs to be satisfied to activate
the Horn Alert:
Table 12-1 Conditions to Activate the Horn Alert (Conventional Channel (Analog/ NXDN/ P25/ DMR))
Type
0
0
Analog Conventional
0
0
0
P25 Conventional
0
0
NXDN Conventional
0
0
0
DMR Conventional
0
0
LTR Trunking System
In an LTR Trunking system, Horn Alert can be enabled or disabled in each Group ID by using KPG-D1/ D1N.
0
If Horn Alert is configured for the Horn Alert key or Menu Mode
One of the following conditions needs to be satisfied to activate Horn Alert:
When Horn Alert is enabled by pressing the Horn Alert key or by selecting "Horn Alert" from Menu Mode
0
When "Start Up" is configured in Horn Alert Mode
0
If one of the above conditions is satisfied, Horn Alert is activated under the following conditions:
When the received Group ID matches if "None" is configured in Optional Signaling of the Group ID which the
0
transceiver waits for and Horn Alert is enabled
When the received Group ID and Optional Signaling match if "DTMF" or "FleetSync" is configured in Optional
0
Signaling of the Group ID which the transceiver waits for and Horn Alert is enabled However, "FleetSync" needs to
be configured in Optional Signaling for a Paging Call.
When the Fix ID for which Horn Alert is enabled matches the received Group ID
0
Regardless of the above conditions, the configuration of Optional Signaling, and all other configurations related to Horn
Alert, the Horn Alert port is activated according to the configuration in Horn Alert Logic Signal when the transceiver receives
Status No.89 of Fleet Sync.
Common FUNC (K, F)/Ver 2.20
If the transceiver receives an Option Signaling while Horn Alert is enabled
If the transceiver receives a Paging Call while Horn Alert is enabled
If the transceiver receives a Call Alert while Horn Alert is enabled
If the transceiver receives Status 89 of FleetSync regardless of the Horn Alert configuration
If the transceiver receives an Individual Call while Horn Alert is enabled
If the transceiver receives an Option Signaling while Horn Alert is enabled
If the transceiver receives an Option Signaling while Horn Alert is enabled
If the transceiver receives a Paging Call while Horn Alert is enabled
If the transceiver receives Horn Alert Status regardless of the Horn Alert configuration
If the transceiver receives an Individual Call or a Group Call while Horn Alert is enabled (except
an Unaddressed Call)
If the transceiver receives a Paging Call while Horn Alert is enabled
If the transceiver receives Horn Alert Status regardless of the Horn Alert configuration
Conditions
CONTENTS
230
INDEX