Kenwood NX-5000 Series Common Function Reference page 209

10 BLUETOOTH COMMUNICATION
10.2 Finding a Bluetooth-compatible Device (Bluetooth Find Device)
2
Press the [ ] or [
A Key Beep A (1 beep) sounds from the transceiver, and then the
transceiver enters Bluetooth Find Device Mode. The transceiver
automatically initiates the search for a Bluetooth-compatible device. A
Bluetooth Find Device Mode Tone (2 beeps) continuously sounds from the
transceiver during the search.
Note
If Bluetooth is disabled when "Bluetooth Device" is executed, Bluetooth
0
is automatically enabled.
The Bluetooth-compatible device first needs to be in pairing mode.
0
3
Find a Bluetooth-compatible Device.
A found Bluetooth-compatible device appears on the display.
With the Bluetooth-compatible device found earliest listed as list number
1, a maximum of 16 devices are displayed. When about 30 sec elapse after
the search is started, or when 16 devices are found, the search ends. Even
if the search ends, the transceiver continues in Bluetooth Find Device
Mode.
Note
The Bluetooth Find Device Mode Tone stops and the search ends if about 30 sec elapse without the transceiver finding
0
a Bluetooth-compatible device. In this case, "BT Not Found" appears on the display.
0 When "BT Not Found" or a found Bluetooth-compatible device appears on the display, pressing the Back ([O]) or [#]
key stops the Bluetooth Find Device Mode Tone and ends the search. A Key Beep A (1 beep) sounds from the transceiver
and the transceiver returns to Bluetooth Device Mode.
A found Bluetooth-compatible device is registered in the transceiver and the transceiver can connect wirelessly. (Refer
0
to Finding, Registering and Connecting a Bluetooth-compatible Device (Bluetooth Find
A found Bluetooth-compatible device is displayed in the format of either the Bluetooth device name, Bluetooth device
0
address, or device class. Pressing the [G] or [H] key can switch the display. (Refer to
a Bluetooth-compatible Device.)
If the Bluetooth device name of a found Bluetooth-compatible device cannot be acquired, the Bluetooth device name is
0
displayed as "- - -".
Mode Reset Timer is extended during a search. Mode Reset Timer is initiated when the search ends.
0
If the transceiver receives an individual call while in Bluetooth Find Device Mode, Bluetooth Find Device Mode ends.
0
If the Bluetooth-compatible device to be connected wirelessly is not found, move the Bluetooth-compatible device closer
0
to the transceiver and search again.
Common FUNC (K, F)/Ver 2.20
] key to select "Find Device", and then press the Menu ([ ]) or [ ] key.
Find Device
Finding
Find Device
LMIC
C11-100047-HP
Conn
Device).)
About the Displayed Contents of
CONTENTS INDEX
12 : 34 A
M
B ac k
12 : 34 A
M
1
Bac k
178