Kenwood NX-5000 Series Common Function Reference page 139

6 SOUND
6.1 Tones that Sound When a User Operates the Transceiver or When the Transceiver Status Is Changed
Function
This tone sounds from the transceiver while the transceiver is searching with the Auto Telephone
in an LTR Trunking system for an available RIC repeater to be connected. This tone sounds from
Queue Tone
the transceiver every 1 sec until an available RIC repeater to be connected is found or Auto
Telephone is terminated if the transceiver cannot find an available RIC repeater within 60 sec.
Free System Ringback This tone sounds from the transceiver when the transceiver enters Free System Ringback Mode
Mode Tone in an LTR Trunking system.
This tone sounds from the transceiver when a repeater is temporarily available in Free System
Ringer Tone
Ringback Mode in an LTR Trunking system.
Priority-channel Tone This tone sounds from the transceiver when the scan is paused on a Priority-channel.
Pressing the Home Channel or Direct Channel key during the scan pauses the scan, and the
transceiver migrates to the Home Channel or Direct Channel. Also, pressing the Channel
Scan Stop Tone
Recall key during the scan pauses the scan, and the transceiver migrates to the last called Zone-
channel. This tone sounds from the transceiver at 30-sec intervals while the scan pauses.
Individual Call Mode This tone sounds from the transceiver when the transceiver initiates a FleetSync Individual Call.
Fleet Call Tone This tone sounds from the transceiver when the transceiver initiates a FleetSync Fleet Call.
Group Call Tone This tone sounds from the transceiver when the transceiver initiates a FleetSync Group Call.
This tone sounds from the transceiver when the transceiver initiates Forced Search in an NXDN
Trunking system.
This tone sounds from the transceiver when the transceiver initiates System Search in a P25
Search Mode Tone
Trunking system.
This tone sounds from the transceiver when the transceiver starts searching for the repeaters that
can be synchronized in a DMR Conventional system.
This tone sounds at 30-sec intervals from the transceiver when the transceiver is in the search
Out of Range Tone state, even if 10 sec elapse after the transceiver starts searching for a control channel in an NXDN
Trunking system or P25 Trunking system.
NXDN Trunking/ P25 Trunking system:
This tone sounds from the transceiver when the transceiver initiates an Individual Call or Group
Call by pressing the PTT switch.
Call Request Tone
NXDN Conventional system:
This tone sounds from the transceiver when the transceiver initiates an Individual Call (Individual
Call Acknowledge Request) by pressing the PTT switch.
OTAP Reactivation
This tone sounds from the transceiver when OTAP Reactivation completes.
Tone
This tone sounds from the transceiver if the transceiver initiates a Telephone Call, Individual Call
Call In Progress Tone (Message Trunked (Enhanced)), or Group Call (Message Trunked (Enhanced)) and the
transceiver is available for communications.
This tone sounds from the transceiver if the transceiver terminates communications with a
Disconnect Indication
Telephone Call, Individual Call (Message Trunked (Enhanced)), or Group Call (Message Trunked
Tone
(Enhanced)).
This tone sounds from the transceiver when Key Data is written to the Secure Cryptographic
Key Load Alert Tone
Module (SCM) or when Key Data is deleted is from the SCM.
Transaction Confirmed In a DMR Conventional system, this tone sounds from the transceiver when the transceiver detects
Tone that no carrier is present after sending a Call Interrupt request message.
Bluetooth Find Device This tone sounds from the transceiver when Bluetooth Find Device is executed in Bluetooth Device
Mode Tone Mode and a Bluetooth-compatible device is searched.
Bluetooth Connect This tone sounds from the transceiver when the transceiver successfully connects to a Bluetooth-
Tone compatible device.
Bluetooth Disconnect This tone sounds from the transceiver when the connection to a Bluetooth-compatible device is
Tone disconnected.
This tone sounds from the transceiver when the transmission successfully sends a Status
Complete Tone
Message, Short Message, GPS data or Paging Call by operating the keys on the transceiver.
Record Stopped Tone This tone sounds from the transceiver when the transceiver exits Voice Memo Mode.
Common FUNC (K, F)/Ver 2.20
Description
CONTENTS
108
INDEX