Touch - Kenwood NX-5000 Series Common Function Reference

Hide thumbs Also See for NX-5000 Series:
Table of Contents

Advertisement

3 BASIC OPERATIONS
3.5 Changing the Zone-channel
3
Press the
Menu ([
The transceiver exits Group ID Entry Mode and then migrates to the channel of the entered Group ID.
If there is no channel with the entered Group ID, a Key-entry Error Tone (1 beep) sounds from the transceiver, and
then the transceiver exits Group ID Entry Mode.
Note
Refer to
"KEY OPERATIONS FOR EACH
0
Pressing the PTT switch while in Group ID Entry Mode causes the transceiver to transmit on the channel selected before
0
the transceiver entered Group ID Entry Mode. If the channel is changed while in Group ID Entry Mode, pressing the PTT
switch initiates transmission on the channel to which the transceiver has changed.
Configuration using KPG-D1/ D1N
Assigning functions to the PF keys on the transceiver (
Changing the Channel with a Single Touch
The channel can be changed with a single touch by using the Home Channel or Direct Channel function.
Home Channel
Home Channel is the function to migrate the transceiver to a preconfigured channel by pressing the Home Channel key.
The transceiver can move to and from channels in the same zone.
Also, pressing the Home Channel Select key can change the Home Channel.
Or, pressing the Menu key causes the transceiver to enter Menu Mode, and then the Home Channel can be changed by
selecting "Home Channel Select". (Refer to
Note
If the Home Channel key is pressed during the scan, the transceiver pauses scanning while the transceiver is migrating
to the Home Channel, and then a Scan Stop Tone (2 beeps) continuously sounds from the transceiver at 30-sec intervals.
Operating the transceiver
0
Migrating to the Home Channel
1
Press the
Home Channel
A Key Beep A (1 beep) sounds from the transceiver, and then the
transceiver migrates to the Home Channel configured for the selected
zone. "Home" appears on the display.
Common FUNC (K, F)/Ver 2.20
]) key.
MODE" for key operations for entering the Group ID in Group ID Entry Mode.
Using Menu
key.
Transceiver Settings > Key Assignment)
Mode.)
CONTENTS
12 : 34
A
M
H o m e
Z o n e 1
C h a n n e l 1
M en u
Zo ne+
45
INDEX

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nx-5400Nx-5800Nx-5200Nx-5700Nx-5900Nx-5300

Table of Contents