Kenwood NX-5000 Series Common Function Reference page 263

12 FUNCTIONS LINKED TO A VEHICLE
12.2 Controlling Vehicle Operation According to the State of the Horn Alert Port (Horn Alert)
Horn Alert Logic Signal
Horn Alert Logic Signal is the function to activate the Horn Alert port depending on the configuration when Horn Alert
functions.
The manner in which the Horn Alert port is activated when the Horn Alert functions can be configured using KPG-D1/ D1N.
Configuration
Until Reset The Horn Alert port remains active until the matching status of Optional Signaling is reset.
1 sec to 30 sec The Horn Alert port remains active for configured amount of time.
The Horn Alert port is activated 3 times at 500 ms intervals.
Pulse
Only when a Fix ID is received, the Horn Alert port becomes active for 1 sec, subsequently
becomes inactive for 500 ms, and then becomes active for 1 sec again.
Note
The Horn Alert port is not deactivated even if the amount of time configured in Horn Alert Logic Signal is longer than
0
the amount of time configured in Auto Reset Timer. The Horn Alert port is deactivated when the amount of time configured
in Horn Alert Logic Signal elapses.
Operating one of the following while Horn Alert is functioning deactivates Horn Alert:
0
When the Horn Alert key is pressed (the Horn Alert is disabled)
0
When the state of the microphone hook is changed
0
When a key is pressed
0
Configuration using KPG-D1/ D1N
Configuring Horn Alert Logic Signal (
Common FUNC (K, F)/Ver 2.20
Table 12-2 Horn Alert Logic Signal
Description
Inactive
500 ms
Active
500 ms
Figure 12-1 Pulse
Inactive
Active
1 sec
Figure 12-2 Pulse (Fix ID)
Transceiver Settings > Optional Features > Optional Features 1 > Horn Alert)
500 ms
500 ms 500 ms
500 ms
1 sec
CONTENTS
232
INDEX