Kenwood NX-5000 Series Common Function Reference page 198

9 STORING RECORDED AUDIO/ GPS DATA
9.4 Playing Back the Recorded Audio (Playback)
Selecting a category folder and pressing the Menu ([Q]) key displays
the audio data folders stored in the category folder.
Selecting an audio data folder and pressing the Menu ([Q]) key displays
the audio data stored in the audio data folder in a list.
Note
A folder in which no audio data is stored is not displayed.
0
The oldest audio data is displayed as list number 1.
0
Each list of audio data is displayed in the format of either the recording
0
start date and time or the ID of the transmitting transceiver. Pressing the
[E] key or [F] key can switch the display. The recording start date and
time is displayed according to the configurations in Date Format and
Time Format.
If no audio data is stored, "Empty" is displayed for 1 sec.
0
2
Press the [ ] key or
A Key Beep A (1 beep) sounds from the transceiver, the playback screen
appears, and playback of the audio data starts.
If playback of the audio data having the last list number ends, the list display is restored.
The following operations are enabled during playback:
Common FUNC (K, F)/Ver 2.20
[ ] key to select the audio data, and then press the
Playback
0 7 / 2 8 / ' 1 5 1 1 : 3 5 A
0 7 / 2 7 / ' 1 5 1 0 : 5 4 A
0 7 / 2 6 / ' 1 5
N ex t
Playback
0 7 / 2 8 / ' 1 5 1 1 : 3 5
0 7 / 2 8 / ' 1 5 1 4 : 2 0
0 7 / 2 8 / ' 1 5 1 5 : 2 3
P lay
Menu ([ ]) or [ ] key.
Playback
0 0 : 0 0 / 0 0 : 4 5
U I D
P aus e
Playback
0 1 / 2 3 / ' 1 4 9 : 2 3 A
0 1 / 2 3 / ' 1 4 9 : 3 5 A
0 1 / 2 3 / ' 1 4 2 : 2 0 P
P lay
CONTENTS INDEX
12 : 34 A
M
1
9 : 2 3 A
Bac k
12 : 34
A
M
1
Bac k
12 : 34 A
M
1
6 5 5 1 9
Bac k
12 : 34 A
M
1
De let e
167