Optional Signaling Led - Kenwood NX-5000 Series Common Function Reference

5 INDICATION AND DISPLAY

5.4 Optional Signaling LED

5.4 Optional Signaling LED
Optional Signaling LED is the function to notify visually by flashing the LED yellow when the received Optional Signaling
matches the Optional Signaling configured in the transceiver, or that the transceiver is in the state of voice communication
to a telephone.
A user can notice by the LED that the transceiver is receiving a call.
When Optional Signaling is no longer matching due to operation of the transceiver key or upon elapse of the time configured
in Auto Reset Timer, the light of the LED goes off.
However, if Selective Call Alert LED or Telephone Call Alert LED is enabled, the LED flashes according to the
configuration of Selective Call Alert LED or Telephone Call Alert LED even when Optional Signaling LED is enabled.
Configuration using KPG-D1/ D1N
0
Configuring Optional Signaling LED in an NXDN Conventional system (
Information > Conventional)
0
Configuring Optional Signaling LED in a DMR Conventional system (
Information > Conventional)
0
Configuring Optional Signaling LED in a P25 Conventional system (
Information > Conventional)
0
Configuring Optional Signaling LED in an NXDN Trunking system (
Information > Trunking)
0
Configuring Optional Signaling LED in a P25 Trunking system (
> Trunking)
0
Configuring Optional Signaling LED of MDC-1200 (
> General)
0
Configuring Optional Signaling LED of FleetSync (
> General)
0
Configuring Optional Signaling LED of DTMF (
0
Configuring Optional Signaling LED of 2-tone
( Transceiver Settings > 2-tone > 2-tone (Analog) > Decode (2-tone 1 to 4))
( Transceiver Settings > 2-tone > 2-tone (Digital) > Decode (2-tone 1 to 4))
Common FUNC (K, F)/Ver 2.20
Transceiver Settings > NXDN > NXDN
Transceiver Settings > DMR > DMR
Transceiver Settings > P25 > P25
Transceiver Settings > NXDN > NXDN
Transceiver Settings > P25 > P25 Information
Transceiver Settings > MDC-1200 > MDC-1200 Information
Transceiver Settings > FleetSync > FleetSync Information
Transceiver Settings > DTMF > Decode)
CONTENTS
90
INDEX