Kenwood NX-5000 Series Common Function Reference page 406

17 STRUCTURING A MULTI RF DECK/ MULTI CONTROL HEAD
17.9 Changing the Display Positions of a Channel Name and an Icon When Multi RF Deck View Is On
17.9 Changing the Display Positions of a Channel Name and an
Icon When Multi RF Deck View Is On
If Multi RF Deck View is enabled when KCH-20R (Featured Panel) or KCH-21R (Handheld Control Head) is used for a
Control Head, the channel names of all RF Decks in the Multi RF Deck system can be displayed simultaneously on the
display.
By changing the configuration of the DIP switch of an RF Deck, the display positions of a channel name and an icon in Multi
RF Deck View can be changed.
RF Deck 1
Deck
RF
A
KRK-15B
Control
Head A
Before DIP Switch Change
Display Position of RF Deck No. 1:
Display Position of RF Deck No. 2:
Display Position of RF Deck No. 3:
Figure 17-69 Changing the Display Position of a Channel Name in Multi RF Deck View
This section describes the procedure to switch an RF Deck number in a system of a Triple RF Deck/ Dual Control Head
structure.
Note
If switching an RF Deck number in a Multi RF Deck system, writing the configuration data is not required.
Common FUNC (K, F)/Ver 2.20
RF Deck 3
RF Deck 2
RF Deck
Deck
RF
B C
KRK-15B KRK-15B
Control
Head B
RF Deck 1 RF Deck 2
RF Deck Deck
RF
C
B
KRK-15B KRK-15B
Control
Head A
After DIP Switch Change
CONTENTS
RF Deck 3
Deck
RF
A
KRK-15B
Control
Head B
375
INDEX