Kenwood NX-5000 Series Common Function Reference page 452

19 CONFIGURATION FOR EACH FUNCTION
19.4 Available Functions for COM Port
Range
None
Data
GPS
Data + GPS Data Output
Transparent
Transparent 2 (NXDN)
COM port Bluetooth
Various functions can be assigned to Bluetooth communication ports.
Table 19-9 Available Functions for Bluetooth Communication Ports
Range
None The transceiver can communicate with KPG-D1/ D1N.
The transceiver can remotely be controlled using PC commands.
Data
The transceiver can communicate with KPG-D1/ D1N.
The transceiver can remotely be controlled using PC commands.
Data + GPS Data The transceiver will send GPS data by adding STX and ETX when the transceiver receives GPS
Output data from another transceiver.
The transceiver can communicate with KPG-D1/ D1N.
The port functions as the data communication port for the Transparent data communication using
Transparent
NXDN protocol.
The port functions as the data communication port for the Transparent data communication using
NXDN protocol which the communication method is optimized.
Transparent 2 (NXDN)
By using Transparent 2 (NXDN), data can be sent more efficiently than using Transparent.
Note
For Mobile, the PC command such as J Command which notifies a user that the transceiver status has been changed
0
cannot be sent from the COM port 0.
If "Display Unit" is configured in Bluetooth Interface Selection, "Transparent" and "Transparent 2 (NXDN)" cannot be
0
configured in COM port Bluetooth.
Refer to "Communication
0
Deck/ Multi Control Head structure for Mobile.
To use COM port Bluetooth, a connection by Serial Port Profile of Bluetooth is required. Refer to
0
Profile (SPP Connection/ SPP
The transceiver is equipped with a communication port on the connection of the internal PC board in the transceiver.
0
Refer to the service manual for details.
Common FUNC (K, F)/Ver 2.20
Table 19-8 Available Functions for COM Ports
COM port 0
The transceiver can communicate with KPG-D1/ D1N.
The transceiver can remotely be controlled using PC commands.
The transceiver can communicate with KPG-D1/ D1N.
-
The transceiver can remotely be controlled using PC commands.
The transceiver will send GPS data by adding STX and ETX when the transceiver receives
GPS data from another transceiver.
The transceiver can communicate with KPG-D1/ D1N.
-
-
Ports" in "Multi RF Deck/ Multi Control Head" for the configuration of COM port in a Multi RF
Disconnection)" for the connection by Serial Port Profile.
Communication Ports
COM port 1
Position data can be acquired from the GPS receiver unit.
Also, the transceiver can send the received GPS data when
the transceiver receives the GPS data from another
transceiver.
The transceiver can communicate with KPG-D1/ D1N.
The port functions as the data communication port for the
Transparent data communication using NXDN protocol.
The port functions as the data communication port for the
Transparent data communication using NXDN protocol
which the communication method is optimized. By using
Transparent 2 (NXDN), data can be sent more efficiently than
using Transparent.
Bluetooth Communication Port
CONTENTS
COM port 2
"About Serial Port
421
INDEX