Using Menu Mode - Kenwood NX-5000 Series Common Function Reference

3 BASIC OPERATIONS

3.4 Using Menu Mode

3.4 Using Menu Mode
Menu Mode allows a selecting a function in the menu format and activating the function.
Since a maximum of 64 functions can be configured for a maximum of 12 categories, many functions can be used in Menu
Mode.
Operating the transceiver
The following procedure is an example of the user operation in Menu Mode. Displays and operation methods vary depending
on the configuration in Menu Icon Size.
0
If "Large" is configured in Menu Icon Size
1
Press the Menu key.
The transceiver enters Menu Mode and then category icons appear.
2
Select a category by pressing the
Note
0 If other function icons are in the rows below and the [F] key is pressed
while the focus is at the right end of the current row, the function icons
in the row directly below appear and the focus moves to the left end of
this row directly below. If other function icons are not in the rows below
and the [F] key is pressed while the focus is at the right end of the current
row, a Rollover Tone (1 beep) sounds from the transceiver, and then the
focus moves to the left end of the current row.
0 If other function icons are in the rows above and the [E] key is pressed
while the focus is at the left end of the current row, the function icons in
the row directly above appear and the focus moves to the left end of this
row directly above. If other function icons are not in the rows above and
the [E] key is pressed while the focus is at the left end of the current row,
a Rollover Tone (1 beep) sounds from the transceiver, and then the focus
moves to the right end of the current row.
3
Press the Menu ([
The Function List for the selected category appears.
Common FUNC (K, F)/Ver 2.20
[ ], [ ],
]) or [ ] key.
[ ], or [ ] key.
CONTENTS
12 : 34
A
M
Audio 1
N ex t
12 : 34 A
M
Message 5
N ex t
12 : 34 A
M
C a l l 1
Individual
Group
Status
N ex t Bac k
37
INDEX