Connecting To A Pc Via Bluetooth - Kenwood TH-D74A User Manual

3 Select [Clear] and press [ENT].
The device clear confirmation screen appears.
4 Press [A/B].
The selected device is cleared and the device list screen
reappears.
Note:
◆ The default setting for "Bluetooth Auto Connect" is [On]. If
the power of the transceiver is turned On, the transceiver will
be automatically connected to the Bluetooth device that was
connected previously.

CONNECTING TO A PC VIA Bluetooth

You can connect a Bluetooth compatible USB adapter to
a PC that does not support Bluetooth and then connect
the transceiver and PC wirelessly. The following explains
the example of connecting with a PC that has a Bluetooth
compatible adapter connected.
A Bluetooth compatible adapter is an adapter that connects
to a PC without a Bluetooth function to enable a wireless
connection between a device with a Bluetooth function such
as headphones and the PC.
Pairing between the transceiver and PC
This function is for searching for the transceiver from the PC.
1 Access Menu No. 934.
The pairing waiting screen appears.
• A countdown begins from 60 seconds. After 60 seconds
elapse, replying to the device search stops and the
menu screen reappears. The countdown continues until
pairing completes.
2 Connect the adapter to the PC.
• When paring by a PC, the passkey is displayed on the
PC and transceiver. When confirming the operation by
a PC and pressing [A/B], the paring completed screen
appears.
Note:
◆ For information how to connect with a Bluetooth
compatible adapter and a PC, refer to the instruction
manual of the PC and adapter.
3 Configure the settings on the PC.
Configure the settings according to the instructions
displayed on the PC.
4 Press [A/B] to return to the frequency screen.
Note:
◆ Once pairing with a PC is complete, multiple COM ports may
appear on the PC, depending on the PC with built-in Bluetooth
function or Bluetooth USB adapter used. In this case, as only
one COM port can be used, use the memory control program
MCP-D74 and use a normal communication port.
◆ When using with a PC or USB adapter which supports
Bluetooth version 2.0 or earlier, passkey is not displayed. In
this case, the input screen of the PIN code on the PC side is
displayed. Please enter [0000] in this case.
◆ Regardless of the transfer rate (baud rate) setting in a PC,
transfer rate (baud rate) between the transceiver and PC are
USB (up to 12 Mbps) or Bluetooth (up to 128 kbps).
Bluetooth Device Information
You can confirm the device name, device address, and device
class of the transceiver. The Bluetooth device name can be
changed.
To Change the Device Name
1 Access Menu No. 935 and then set the setting.
The Bluetooth device information screen for the transceiver
appears.
2 Press [A/B].
The mode becomes the text input mode.
3 Select the characters you wish to input.
For the detailed character input procedure.
4 Press [ENT].
The device name is changed.
18-3