Kenwood NX-5000 Series Common Function Reference page 397

17 STRUCTURING A MULTI RF DECK/ MULTI CONTROL HEAD
17.4 Removing an RF Deck/ Control Head
6
Write the FPU data.
The FPU data for Triple RF Deck/ Single Control Head is written in a Multi RF Deck system. Always write the FPU
data in a Multi RF Deck system. Refer to
configuration data.
KPG-D1/ D1N
Changing Configuration Data While a System in a Multi RF
17.5
Deck/ Multi Control Head Structure Is Operating
While a system in a Multi RF Deck/ Multi Control Head structure is operating, the configuration data can be collectively
written at the same time for the Multi RF Deck/ Multi Control Head system. Rebuilding a Multi RF Deck/ Multi Control Head
structure as a Single RF Deck/ Single Control Head structure is not required.
Refer to "Configuration in KPG-D1/ D1N if RF Decks Are
Common FUNC (K, F)/Ver 2.20
"Configuration in KPG-D1/ D1N if RF Decks Are
Figure 17-55 Dual RF Deck/ Dual Control Head (FPU Setting)
Deck 1
RF
KRK-15B
Control Head
1
Switched" for writing configuration data.
CONTENTS
Switched" for writing
RF Deck 2
KRK-15B
Control Head
2
366
INDEX