Kenwood NX-5000 Series Common Function Reference page 169

6 SOUND
6.8 Using Voice Guidance (Voice Announcement)
6.8 Using Voice Guidance (Voice Announcement)
Voice Announcement is the function to notify the following contents by voice:
0
The selected Zone-channel number when the transceiver is turned ON and the new Zone-channel number when the
Zone-channel is changed (Refer to
0
The function status and transceiver status when the PF key is operated (Refer to
0
The reception status (Refer to
0
To use these voice guidance functions, the voice guidance method needs to be configured in Voice Announcement
Type.
Note
The audio for Voice Announcement sounds from the speaker of the transceiver. However, if the external speaker is
0
connected to the transceiver, the audio sounds from the external speaker.
The volume for Voice Announcement is set according to the configuration in Control Tone. Voice Announcement does
0
not function if "Off" is configured in Control Tone. (Refer to
Volume).)
Voice Announcement does not function while the transceiver is in Emergency Mode.
0
Voice Announcement does not function if a zone or channel is changed by using the scan function.
0
The received audio does not sound from the speaker while the audio for Voice Announcement sounds.
0
Configuring Voice Guidance Method (Voice Announcement Type)
Voice Announcement Type is the function to specify whether to execute various voice guidance by using fixed phrases
or by using audio files arbitrarily configured by a user.
The transceiver behaves as follows according to the configuration in Voice Announcement Type:
Configuration
None Voice guidance is not executed.
The Zone-channel number, key function status, and transceiver status are notified by using the
fixed phrase audio.
Voice guidance can be executed in 3 languages configured in Language 1 to Language 3 of
Standard Voice and Display Language. The languages that can be configured in Language 1 to
Language 3 are as follows:
The Zone-channel name, key function status, transceiver status, and received status are notified
by using the audio configured by a user.
Configure the audio to be used by selecting from the audio files registered in Audio Library.
Therefore, the audio files to be used for voice guidance need to be registered in Audio Library
beforehand.
User Programmable
Common FUNC (K, F)/Ver 2.20
Zone-Channel Guide.)
Status Guide.)
Table 6-24 Voice Announcement Type
English, Spanish (Spain), Spanish (Latin America), French, German, Italian, Dutch, Russian,
Portuguese (Brazil)
Note
The audio file that can be registered in Audio Library is 8 k 16 bit monaural PCM data within
5 sec. When the total capacity of Audio Library reaches 3 MB, or when the total number of files
reaches 240, no more audio files can be registered. To register a new audio file, a file registered
in Audio Library needs to be deleted.
Function
Configuring the Volume Level of Various Tones (Tone
Description
CONTENTS
Guide.)
138
INDEX