Beat Shift - Kenwood NX-5000 Series Common Function Reference

4 TRANSMISSION/ RECEPTION

4.4 Beat Shift

4.4 Beat Shift
Beat Shift is the function to eliminate the influences of heterodyning in the SCM caused by internal oscillators.
Due to the transceiver's circuit configuration, the harmonics of the oscillators may interfere with reception depending on the
receive frequency. The interference to reception can be avoided by slightly shifting the frequency of the oscillator in the
SCM.
The clock frequency of the SCM is shifted on the channel where Beat Shift for the SCM is enabled.
In P25 Conventional, NXDN Conventional, and DMR Conventional systems, Beat Shift can be configured for each channel
(Personality).
In an NXDN Trunking system, Beat Shift can be configured in the Frequency Table of the NXDN Trunking system.
In an LTR Trunking system, Beat Shift can be configured for each repeater CH (frequency) structuring the LTR Trunking
system.
In Analog Conventional and P25 Trunking systems, Beat Shift cannot be configured.
Configuration using KPG-D1/ D1N
0
Configuring Beat Shift in a P25 Conventional system to be enabled or disabled (
> Personality > P25 Conventional > General > Beat Shift)
0
Configuring Beat Shift in a P25 Conventional system to be enabled or disabled (
Channel > Channel Edit > P25 Conventional > General > Beat Shift)
0
Configuring Beat Shift in an NXDN Conventional system to be enabled or disabled (
Personal > Personality > NXDN Conventional > General > Beat Shift)
0
Configuring Beat Shift in an NXDN Conventional system to be enabled or disabled (
Channel > Channel Edit > NXDN Conventional > General > Beat Shift)
0
Configuring Beat Shift in a DMR Conventional system to be enabled or disabled (
> Personality > DMR Conventional > General)
0
Configuring Beat Shift in a DMR Conventional system to be enabled or disabled (
Channel > Channel Edit > DMR Conventional > General)
0
Configuring Beat Shift in an NXDN Trunking system to be enabled or disabled (
Network > Frequency Table)
0
Configuring Beat Shift (SCM) in an LTR Trunking system to be enabled or disabled (
Personal > Personal Features > LTR Trunking > Repeater Information)
Common FUNC (K, F)/Ver 2.20
Transceiver Settings > Personal
Transceiver Settings > Zone/
Transceiver Settings >
Transceiver Settings > Zone/
Transceiver Settings > Personal
Transceiver Settings > Zone/
Transceiver Settings > NXDN
Transceiver Settings >
CONTENTS INDEX
82