Displaying The Location Information - Kenwood NX-5000 Series Common Function Reference

8 GPS POSITION DISPLAY
8.1 Configuring the GPS Position Display
Altitude
0
This function can be used to configure whether the altitudinal value appears on the transceiver display. If this function
is enabled, the altitudinal value appears on the transceiver display in GPS Position Display Mode. For convenience
of the user, either meters or feet can be configured for the format to display the altitudinal value.
If this function is disabled, the altitudinal value does not appear in GPS Position Display Mode.
Configuration using KPG-D1/ D1N
0
Configuring COM port (
port)
0
Configuring Built-in GPS Receiver/Bluetooth to be enabled or disabled (
Features > Optional Features 2 > GPS/Bluetooth)
0
Assigning functions to the PF keys on the transceiver (
0
Configuring Latitude and Longitude (
Bluetooth > GPS > GPS Position Display)
0
Configuring Altitude (
> GPS Position Display)

Displaying the Location Information

8.2
The transceiver enters GPS Position Display Mode if the GPS Position Display key is pressed or "GPS Position Display"
is selected by pressing the Menu key while the transceiver is in standby mode.
For Mobile, the transceiver automatically toggles between displaying the location (latitude and longitude) and the altitude
approximately every 5 sec while in GPS Position Display Mode. Pressing the Menu ([Q]) or [*] key aborts GPS Position
Display Mode.
Note
The transceiver cannot enter GPS Position Display Mode if the display that appears in GPS Position Display Mode is not
0
configured.
0 For Mobile, pressing and holding the Menu ([Q]) or [*] key pauses the toggling of the automatic display. Pressing and
holding the Menu ([Q]) or [*] key again resumes the toggling of the automatic display.
Common FUNC (K, F)/Ver 2.20
Transceiver Settings > Optional Features > Optional Features 1 > Serial Interface > COM
Transceiver Settings > Optional Features > Optional Features 2 > GPS/
Transceiver Settings > Optional Features > Optional Features 2 > GPS/Bluetooth > GPS
Latitude and longitude
Altitude
Transceiver Settings > Optional
Transceiver Settings > Key Assignment)
5 seconds later
5 seconds later
CONTENTS
151
INDEX