Kenwood NX-5000 Series Common Function Reference page 424

19
19 CONFIGURATION FOR EACH FUNCTION
CONFIGURATION FOR EACH FUNCTION
19.1 Available Functions for the PF Keys
The following are the functions that can be assigned to the PF keys:
Function Name
None No function is activated.
The transceiver enters 2-tone Mode. In 2-tone Mode, the transceiver can send
2-tone
a 2-tone code by selecting a 2-tone code configured in Encode List of 2-tone.
Toggles Activity Detection between enabled and disabled.
See
P25 FUNC
0
Activity Detection Detection Function (Portable Only)
(Portable only)
NXDN FUNC
0
in Emergency Mode
DMR FUNC
0
Activity Detection Function
The Man-down Delay Time, Stationary Delay Time, or Motion Delay
Time timer is reset and then restarts counting down from the beginning.
See
P25 FUNC
0
Activity Reset
Detection Function (Portable Only)
(Portable only)
NXDN FUNC
0
in Emergency Mode
DMR FUNC
0
Activity Detection Function
The transceiver searches an LTR Trunking system that can connect to a
Auto Telephone
telephone line and connects.
The transceiver enters Autodial Mode. In Autodial Mode, the transceiver can
transmit by selecting a DTMF Code from the Autodial List or by entering a
DTMF Code.
Autodial
See
P25 FUNC
The transceiver enters Autodial Programming Mode. In Autodial Programming
Autodial
Mode, the data configured in Autodial List can be added, changed, and
Programming
deleted.
Alternates the status of the AUX Output port. The AUX Output port status is
changed to inactive if the status is active; or, the AUX Output port status is
AUX (Portable
changed to active if the status is inactive. Status of the AUX port can be
only)
changed by pressing the AUX key, hence an external device connected to the
AUX port can be controlled.
Alternates the status of the AUX A Output port. The AUX A Output port status
is changed to inactive if the status is active; or, the AUX A Output port status
AUX A (Mobile
is changed to active if the status is inactive. Status of the AUX A port can be
only)
changed by pressing the AUX A key, hence an external device connected to
the AUX A port can be controlled.
Alternates the status of the AUX B Output port. The AUX B Output port status
is changed to inactive if the status is active; or, the AUX B Output port status
AUX B (Mobile
is changed to active if the status is inactive. Status of the AUX B port can be
only)
changed by pressing the AUX B key, hence an external device connected to
the AUX B port can be controlled.
Common FUNC (K, F)/Ver 2.20
Table 19-1 Available Functions for the PF Keys
Description
Placing the Transceiver in Emergency Mode Using the Activity
Using the Activity Detection Function to Place the Transceiver
Placing the Transceiver in Emergency Mode by Using the
Placing the Transceiver in Emergency Mode Using the Activity
Using the Activity Detection Function to Place the Transceiver
Placing the Transceiver in Emergency Mode by Using the
Communicating with a Telephone (Telephone Call)
Available
Communication
Systems
-
Analog Conventional
P25 Conventional
NXDN Conventional
ALL
ALL
LTR Trunking
P25 Trunking
Analog Conventional
NXDN Conventional
LTR Trunking
NXDN Trunking
ALL
ALL
ALL
ALL
CONTENTS INDEX
*1
393