[:Sense]:Demod Subsection - Agilent Technologies ESA-E Series Programmer's Manual

Language Reference
SENSe Subsystem
Factory Preset
and *RST: The factory default is the input impedance of the
analyzer.
Range: 50 or 75 ohms
Default Unit: ohms
Front Panel
Input, Input Z Corr 50 Ω 75 Ω
Access:
External Amplifier Correction
[:SENSe]:CORRection:OFFSet[:MAGNitude]
<rel_ampl>
[:SENSe]:CORRection:OFFSet[:MAGNitude]?
A single value of amplitude correction can be applied to the displayed
trace data to compensate for signal losses or gains that are due to other
devices in the measurement setup, rather than the unit under test.
Factory Preset
and *RST: 0 dB
Range: –81.9 to 81.9
Default Unit: dB
Front Panel
Access:
AMPLITUDE/Y Scale, Ext Amp Gain
DEMod Subsection
[:SENSe]:
Type of Demodulation
[:SENSe]:DEMod AM|FM
[:SENSe]:DEMod?
Sets the type of demodulation.
Factory Preset
and *RST: AM
Front Panel
Access:
Det/Demod, Demod, AM
Det/Demod, Demod, FM
FM Deviation
[:SENSe]:DEMod:FMDeviation <freq>
[:SENSe]:DEMod:FMDeviation?
Sets the total FM frequency deviation for full screen demodulation.
5-88 Chapter 5