Selecting Sweep Area Display (Start/Stop Or Center/Span); Procedure - Agilent Technologies E4991A Operation Manual

Display Setting

Selecting Sweep Area Display (Start/Stop or Center/Span)

Selecting Sweep Area Display (Start/Stop or Center/Span)
The sweep area shown at the bottom of the measurement display can be set to display
either the sweep's start value and stop value or the sweep's center value and span value.

Procedure

Step 1. Right-click to open the shortcut menu and select
Step 2. Click the
Stimulus Display
Button
Stimulus Display
Stimulus Display: [Start/Stop]
Stimulus Display: [Center/Span]
118
Start/Stop
Button, and select the Sweep Area Display Mode.
Sweep Area Display Mode
The sweep start value and the sweep stop value.
The sweep center value and the sweep span
value.
(or press the key).
Chapter 5