Flow Tracker Series 1000/2000
Flow mode
10
Figure 2
shows the parameters associated with flow mode.
Gas temperature
Gas absolute pressure
Primary display
(default is
mass flow rate)
Volumetric flow rate
Power on
(press and hold)
Mass flow rate
Figure 2
Flow mode parameter buttons
Parameters
Gas absolute pressure
to measure the line pressure of the gas flow being monitored.
This sensor references hard vacuum and accurately reads line
pressure both above and below local atmospheric pressure. The
The Agilent Flow Trackers use a sensor
Flow Tracker 1000/2000 User Information
Gas select
Low-battery
indicator
Mode
Power off
Zero (tare)